Top seller
No results were found for the filter!
Features such as low power consumption, high precision of motion detection, high shock tolerance up to 20,000 g, a programmable full-scale range for increased accuracy, allow 6DOF IMU 4 click to be used for development of different types...
₹1,679.00 *
The Click board™ is equipped with all the necessary elements, required to provide a reliable operation: it has a varistor across the relay output contacts, preventing excessive voltage transients, it has a flyback diode for the backEMF...
₹1,579.00 *
The DPS422 is designed with the low-power consumption in mind, has a very small size, and requires a low number of external components. These features make the DPS422 a perfect choice for an IoT or battery-powered application. Therefore,...
₹1,579.00 *
With its ability to accommodate to different light conditions especially behind a dark glass, the ADPS9930 represents an ideal solution for dimming TFT and LCD displays on various devices. Positioned behind a semi-transparent bezel, it...
₹1,469.00 *
The HIH6130 sensor IC has compensation for relative humidity in the range from 10 to 90 %RH and temperature in the range from 0 °C to 50°C, yielding typical accuracy of ±3 %RH and ±0.5°C. It consumes a very low amount of power while...
₹2,939.00 *
Temp-Log 5 click is a temperature measuring Click board™ featuring the CAT34TS02, an accurate temperature sensor IC with integrated Serial Presence Detect EEPROM. Temperature Sensor measures and store temperatures at least 10 times in...
₹1,259.00 *
The ACS723 has a precisely trimmed analog output, which changes linearly with the applied current. Its accuracy is further optimized through the Allegro’s patented digital temperature compensation. Its excellent galvanic isolation...
₹1,889.00 *
The MAX6642 features a high accuracy of ±1°C within the range between +60°C and +100°C, which is a critical thermal bandwidth of most IC with the substrate PNP transistor as a temperature sensor. However, the Click board™ can be operated...
₹949.00 *
The Click board™ can detect objects regardless of their color, thanks to the VCSEL that emits a light beam with the wavelength of 940nm. This makes it also immune to a red glow. The current through the VCSEL can be programmed by the...
₹1,369.00 *
With the total height of 1.10mm, the BMA456 is well suited for using it in wearable and handheld devices. Its powerful event detection engine is equipped with a set of features suitable for a wearable device, including step detection and...
₹1,789.00 *
The I3G4250 IC supports both I2C and SPI interfaces, which allows Gyro 3 click to be interfaced with a wide range of different MCUs. Although it is very sensitive (down to 0.008 dps/LSB) it is very resistant to shock and has a...
₹2,629.00 *
The ISM330DLC is produced using well-proven microelectromechanical sensor (MEMS) manufacturing processes, along with the CMOS technologies that allow a high integration scale on a wafer level, providing good component matching and...
₹2,209.00 *
Environment 6DOF IMU 11 Gyro 2 Click IR Sense 3 Thermo J click Heart Rate 3 13DOF Click Grid-EYE click Hall Current 4 GYRO click 9DOF click Angle 4 click EMG click FLAME click Force click IR Sense 2 MPU IMU click GSR click DHT22 2 click Pedometer 3 6DOF IMU click Proximity 8 Accel 12 click IrDA 3 click UV2 click Vibra sense Tilt click Alcohol 3 click Opto Encoder 2 Air quality Opto Encoder Slider click 3D Hall 6 Click Color 6 click SHT1x click ECG EMG sensors TMR Angle Click Light click MOTION click Alcohol click Heart Rate 7 PIR Click RTD click Gyro 4 Click 6DOF IMU 2 Water Detect
Viewed