Top seller
No results were found for the filter!
RFid click features CR95HF 13.56 MHz contactless transceiver as well as trace antenna. The click is designed to run on a 3.3V power supply only. It communicates with the target MCU via mikroBUS™ UART (TX, RX), SPI (MISO, MOSI, SCK, CS)...
₹3,049.00 *
AnyNet 2G click is a cellular to AWS gateway device, which provides developers with the complete solution for various IoT applications, by using the AWS IoT and Cloud Storage services for the data storage, analyzing and processing. This...
₹7,249.00 *
IQRF click carries the DCTR-76DA RF transceiver, operating in the 868/916 MHz frequency. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or UART interface, with additional...
₹4,519.00 *
IQRF 2 click carries the DCTR-72DAT RF transceiver, operating in the 868/916 MHz frequency. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or UART interface, with additional...
₹5,389.00 *
RN4871 click carries the RN4871 Bluetooth® 4.2 low energy module from Microchip. The click is designed to run on a 3.3V power supply. It uses ASCII Command Interface over UART for communication with target microcontroller, with...
₹3,469.00 *
Determine your current position with GNSS 5 click . It carries the NEO-M8N GNSS receiver module from u-blox . GNSS 5 click is designed to run on a 3.3V power supply. The click communicates with the target microcontroller over I2C or UART...
₹4,309.00 *
RN4870 click carries the RN4870 Bluetooth® 4.2 low energy module from Microchip. The click is designed to run on a 3.3V power supply. It uses ASCII Command Interface over UART for communication with target microcontroller, with...
₹3,469.00 *
WiFi 7 click carries the ATWINC1510-MR210PB IEEE 802.11 b/g/n module, specifically optimized for low-power IoT applications. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI...
₹3,049.00 *
GPS 4 click carries the L70 compact GPS module from Quectel. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional functionality provided by...
₹3,569.00 *
RN4678 click carries the RN4678 Bluetooth® 4.2 dual mode module from Microchip. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C and UART interface, with additional...
₹3,049.00 *
6LoWPAN T click carries the CC2520 2.4GHz RF transceiver. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following...
₹2,729.00 *
4G LTE-NA click carries the LARA-R204 multi-mode cellular module from u-blox. The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target microcontroller over UART interface, with...
₹12,079.00 *
NFC Tag 2 click GPS Click 6LoWPAN C click nRF T click NFC Extend NANO GPS click EnOcean 2 click 6LoWPAN T click OOK RX click IR Beacon Click GSM GNSS 2 GSM Click GSM-GPS click NB IoT Click GNSS 4 click EnOcean 3 Click nRF C click BT Audio click nRF S click GSM2 click OOK TX click NFC Tag click LoRa click 4G LTE-NA click ccRF click GPS3 click tRF click Thingstream GSM 4 click 4G LTE-APJ WiFi2 click GSM3 click ccRF 3 click 3G-AA Click RFid click BLE 8 Click IrDA2 click GNSS 7 click EnOcean click GPS 4 click M-BUS RF click SPIRIT click GSM GNSS click LoRa 3 click 3G-EA Click Eu MiWi click
Viewed