Top seller
No results were found for the filter!
RadioStation click is a unique click board™ that can be used to broadcast the music via the FM radio band. It features the Si4713-B30 from Silicon Labs , the best in class integrated FM broadcast stereo transmitter, which operates in the...
₹2,629.00 *
2x20W Amp click carries the MAX9744 stereo class D audio power amplifier from Maxim Integrated. This click brings the Class AB sound performance with Class D efficiency. The perfect combination for your speakers. 2x20W Amp click also...
₹2,209.00 *
BUZZ 2 click carries the CMT-8540S-SMT magnetic buzzer transducer. The buzzer’s resonant frequency is 4kHz. The click is designed to run on either 3.3V or 5V power supply. How the click works The CMT-8540S-SMT magnetic buzzer is...
₹1,259.00 *
Mic click carries the SPQ0410HR5H-B surface mount silicon microphone with maximum RF protection. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over the AN pin on the mikroBUS™ line....
₹949.00 *
GainAMP click carries the LTC®6912 dual channel, low noise, digitally programmable gain amplifier (PGA). The click is designed to work on either 3.3V or 5V power supply. It communicates with the target MCU over SPI interface, with...
₹1,579.00 *
2x5W AMP click functions as an amplifier and features the TDA7491LP 2x5-watt dual BTL class-D audio amplifier. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over the following pins on...
₹1,999.00 *
The StereoAmp click features a 3.5mm input jack and four output screw terminals for connecting passive speakers. It runs on either 3.3V or 5V power supply and communicates with the MCU through the I2C interface. Volume control Each...
₹2,519.00 *
When the volume of ambient sound reaches the set threshold, an interrupt is triggered. The most important parts of the circuit are the microphone, an RMS-to-DC converter, two dual rail-to-rail Input/Output 10 MHz operational amplifiers,...
₹3,049.00 *
AudioAmp click is a mikroBUS™ add-on board that functions as a mono audio amplifier. It is driven by a Texas Instruments LM48100Q-Q1 Boomer™ Mono, 1.3W Audio Power Amplifier IC. AudioAmp click has one 3.5 mm input jack and next to it...
₹1,469.00 *
Text To Speech click is a mikroBUS™ add-on board that carries an Epson S1V30120 speech synthesis IC. The IC is powered by the Fonix DECtalk® v5 speech synthesis engine that can make your robot or portable device talk in US English,...
₹4,099.00 *
FM Click with it’s Si4703 IC is a complete FM radio tuner in the form of add-on board. It supports worldwide FM band (76 – 108 MHz). The board contains two LM4864 audio amplifiers as well. Si4703 has a nice set of features like automatic...
₹3,049.00 *
BUZZ Click is an accessory board in mikroBus™ form factor. Board features a piezo speaker capable of emitting audio signals. Buzzer’s resonant frequency is 3.8kHz (where you can expect it’s best performance). On-board buzzer driver is...
₹949.00 *
Audio Amp 6 StereoAmp click AM FM Click Buzz Click Mic click MP3 Click TextToSpeech SPEAKUP 3 CLICK REC PLAY Click RadioStation AudioAmp click MIC 2 click AudioAmp 2 Noise click FM click GainAMP 2 click AudioMUX Click AudioAmp 3 GainAMP click AudioAmp 4 BUZZ 2 click EVC Click BT Audio 3 2x20W Amp click Audio Amp 5 2x5W AMP click
Viewed