Top seller
No results were found for the filter!
The Click board™ contains the required resistances used to form a voltage divider with the sensor, as well as the accurate SAR type ADC with 12-bit resolution which allows the voltage to be converted, using 5V from the mikroBUS™ rail as...
₹3,359.00 *
The MCP9843 IC meets JEDEC specification JC42.4-TSE3000B3 and JC42.4-TSE2002B3, allowing it to be used as a thermal sensor for memory modules. The MCP9843 is designed specifically for DRAM DIMMs (Dual In-line Memory Modules), allowing...
₹1,259.00 *
There are many applications that use this kind of switches. It can be used in various consumer electronic devices, such as portable heaters, video games, pinball machines, various kinds of position-activated toys, and similar...
₹1,369.00 *
Due to its high precision and flexible alerting possibilities, programmable thresholds, threshold hysteresis that prevents false alerts, and a dedicated programmable alert pin with the user selectable logic status, this Click board™...
₹949.00 *
The MPXV7007DP sensor is shaped so two small tubes can be attached to it, simplifying its practical application. This makes this Click board™ an ideal solution for monitoring the pressure in different kinds of HVAC applications, hospital...
₹2,839.00 *
DO NOT TOUCH THE BOARD WHILE THE EXTERNAL POWER SUPPLY IS ON! Note : Voltage higher than 50V can be hazardous! The click is to be used by trained personnel only and attention when applying high voltage is strongly adviced. Due to the...
₹1,889.00 *
Temp&Hum 10 click can measure the humidity in the range from 0 to 100 %RH and temperature in the range from -30 °C to +100 °C, with the typical accuracy of ±3 %RH and ±0.4 ?. It consumes small amounts of power while in operation,...
₹1,679.00 *
Features such as the embedded self-test, support for the hard iron compensation, selectable power mode, 16-bit data output, a wide dynamic range of the measurement (±50 gauss), make this Click board™ a perfect choice for various IoT...
₹1,579.00 *
MPR series sensors offer many benefits, making them ideally suited to be used on many different application designs. By featuring the MPRLS0025PA00001A absolute pressure sensor, Pressure 8 click is the perfect tool for development of...
₹2,629.00 *
Note: ECG 4 is a development and prototyping tool. It is not intended to be used for medical treatment of patients and other life-critical applications! The BMD101 SoC integrates all the necessary components, so there are very few...
₹3,679.00 *
The ACS733 has a precisely trimmed analog output, which changes linearly with the applied current. Its excellent galvanic isolation simplifies the application, allowing the Click board™ to be connected directly to the measured circuit....
₹1,889.00 *
The pressure sensor contains protective gel, preventing water or humidity to damage the circuit. Additionally, it is protected from overpressure, allowing it to withstand pressure peaks up to 20x its measurement range. These features...
₹2,519.00 *
6DOF IMU 4 HDC1000 click 6DOF IMU 11 PIR Click Accel 12 click IrDA 3 click FLAME click Heart Rate 3 3D Hall 2 click Color 3 click IR Sense 2 IR Sense 3 6DOF IMU click ECG 3 Click Force click 13DOF Click LDC1101 click 3D Hall 7 click 3D Motion click DHT22 click Angle 4 click Slider click MOTION click Thermo 13 Click NO2 click Smoke click Opto Encoder Heart Rate 7 6DOF IMU 2 GSR click ECG EMG sensors ECG 4 Click Pedometer 3 Pressure 2 Gyro 2 Click Thermo J click Manometer 2 Manometer click RTD click Pressure 8 Hall Current 4 Temp-hum 11 Hall Current 5 3D Hall 6 Click Grid-EYE click Gyro 4 Click
Viewed