Top seller
No results were found for the filter!
USB UART click offers a USB to asynchronous serial data (UART) interface, allowing the microcontroller based designs to communicate with the personal computer, in a very simple way. It is equipped with the FT232RL, a very popular USB to...
₹1,459.00 *
CAN SPI click 5V is an accessory board in mikroBUS form factor. It is the best solution to add CAN connectivity to your microcontroller with SPI interface. Board features MCP2551 can transciever circuit which provides CAN serial...
₹2,209.00 *
OBDII click offers a unique opportunity to tap inside the car diagnostic systems. It features the STN1110 Multiprotocol OBD to UART Interface, developed by the ScanTool technologies. This click can be used for the communication with the...
₹5,029.00 *
BroadR-Reach click brings the industry grade communication standard to the mikroBUS™, which is built to be used in an Ethernet-based open network. The click board is equipped with the BCM54811 Transceiver from Broadcom Limited , which is...
₹7,249.00 *
ATA663254 click is a fully integrated LIN transceiver device with an integrated 5V LDO voltage regulator. The combination of voltage regulator and bus transceiver makes it possible to develop simple but powerful slave nodes in LIN bus...
₹1,679.00 *
RS232 Isolator click is a fully isolated dual transceiver click, used to provide secure and easy UART to RS232 conversion, with the galvanic isolation. The digital input and output signals are transmitted across the isolation barrier by...
₹5,879.00 *
DALI is an international standardized protocol for intelligent digital lighting control, that enables an easy implementation of robust, scalable and flexible lighting networks. DALI stands for Digital Addressable Lighting Interface and...
₹2,629.00 *
The RS232 communication standard is established back in the ‘60s, but thanks to its implementation on a wide range of devices - including PC motherboards, it gained a lot of popularity and it is still in use. Over time, this standard...
₹1,579.00 *
How does it work? LLC I2C click does not use an integrated circuit, as already mentioned. With ICs avoided completely, there are some benefits gained: the overall cost of the LLC circuit is greatly reduced, a more robust MOSFET solution...
₹949.00 *
ATA6570 click is a CAN Partial Networking interface board. The click carries the ATA6570 , a high-speed CAN transceiver that interfaces a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. This IC has...
₹2,419.00 *
The possibility to cascade more devices, as well as the ability to additionally fine-tune each PWM channel separately, compensating the brightness differences between the LED elements (dots), make PWM 2 click an ideal solution for...
₹1,999.00 *
iButton click - is an iButton™ probe Click board™. The iButton is a technology based on the 1-Wire® communication protocol, and a chip usually packed in a robust stainless steel casing. The button-shaped iButton device has two contacts -...
₹3,679.00 *
I2C 1-Wire Dual LIN click RS485 click RS485 3 click UART I2C SPI RS485 click 5V LIN Click M-Bus Master DALI 2 click Expand 3 click PWM 2 click USB SPI click RS232 SPI click RS485 2 click iButton click I2C to SPi BroadR-Reach CAN FD Click ETH WIZ click MCP2003B click USB UART 3 UART Mux click CAN Isolator RS232 Isolator EXPAND click RS232 2 click RiBUS Click 4-20 mA T click RS232 click Shuttle click RS485 4 Click USB UART 2 PS 2 click MCP2518FD click MCP2517FD click ETH Click Fiber Opt click I2C Isolator ATA6563 click Expand 2 click LLC SPI Click USB I2C click OBDII click Expand 4 click DALI Click I2C Isolator 2
Viewed