Top seller
No results were found for the filter!
USB UART 3 click USB UART 3 click is a versatile and feature-rich USB to UART interface from Silicon Labs. It uses CP2102N which is a part of their USBXpress™ family. These devices are designed to quickly add a USB 2.0 full-speed compliant UART interface...
₹2,239.00 *
LLC SPI Click Besides this, MOSFETs can withstand up to 20V across their terminals (12V VGS), and supports far greater currents than the typical ICs, making them less likely to fail. The LLC circuitry, also known as the level translator or level...
₹1,369.00 *
UART 1-Wire Click Featuring a set of options for fine-tuning the 1-Wire ® bus performance, allowing it to accommodate to a wide variety of different applications, complex state machine which allow straight-forward conversion of characters sent over the...
₹3,239.00 *
UART I2C/SPI Click RS-232 standard was introduced in ’60, as a serial interface between Data Terminal Equipment (DTE) and Data Communication Equipment (DCE). After undergoing several revisions, it is still used, even 60 years after it has been first...
₹2,519.00 *
RS485 4 Click The ADM2795E, as the main component of the RS485 4 click complies with many regulations: Level 4 EMC protection, IEC 61000-4-5 surge protection (±4kV), IEC 61000-4-4 electrical fast transient (EFT) protection (±2 kV), IEC 61000-4-2...
₹5,859.00 *
MCP2518FD click The physical layer is implemented by using a separate IC, which provides increased robustness, required for the automotive applications. It features three operating modes, remote wake-up via the CAN, and offers ideally passive behavior...
₹6,729.00 *
Terminal click Terminal click is a mikroBUS™ socket expansion board, which provides an easy and elegant solution for adding the external connection capability to the click board™, plugged on a mikroBUS™. Featuring stacking headers makes it easy way for...
₹999.00 *
I2C to SPi Click I2C to SPi Click is an all-in-one solution which allows serving as an interface between a standard I2C-bus of a microcontroller and an SPi bus, which allows the microcontroller to communicate directly with SPi devices through its...
₹2,739.00 *
RiBUS Click RiBUS Click is an adapter Click board™ that allows a mikroBUS™ to interface with RiBUS compatible display modules. RiBUS is the intelligent display BUS, by Riverdi, supported by a wide range of Intelligent Display Modules equipped with...
₹1,369.00 *
Shuttle click Shuttle click is a mikroBUS™ socket expansion board, which provides an easy and elegant solution for stacking up to four click boards™ on a single mikroBUS™. It is a perfect solution for expanding the capacity of the development system...
₹1,249.00 *
LIN Click The LIN Click is a Click board™ that features the TLE7259-3GE, a LIN transceiver from Infineon Technologies, with integrated wake-up and protection features. The combination of Slave and Master node in LIN systems, the LIN click can be...
₹1,739.00 *
Dual LIN click The Dual LIN click is a Click board™ based on the TLE7268SKXUMA1, a Dual LIN transceiver from Infineon. Given the features included in this transceiver, the Dual LIN transceiver designed for data transmission rates up to 20 kbps being...
₹1,739.00 *
PWM click RS232 Isolator Shuttle click LIN Click 4-20 mA R click PS 2 click Fiber Opt click PWM 2 click RS232 SPI click MCP25625 click M-Bus Master RS232 2 click CAN Isolator 4-20 mA T click 1-Wire I2C RS485 3 click USB UART 4 ATA663211 click USB UART click RS485 click 5V I2C Isolator 2 FTDI click CAN FD Click CAN SPI click UART Mux click CAN SPI click UART 1-Wire DALI 2 click ATA6563 click ETH WIZ click RS232 click RS485 4 Click RS485 2 click RS485 click I2C Isolator LLC-I2C Click BroadR-Reach MCP2517FD click SPI Isolator LLC SPI Click I2C 1-Wire Dual LIN click EXPAND click ETH Click MCP2518FD click MCP2003B click
Viewed