Features HN11-I101 is the standard idler bearing set for Dynamixel XL 430 series. This idler bearing is connected to the opposite side of the output shaft of Dynamixel X, and can be used to assemble the hinge frame on it. Patented hollow...

Xilinx Kria KR260 Robotics Starter Kit is a development platform based on the Kria K26 SOM and built for robotics and industrial applications. It is complete with high-performance interfaces and native ROS 2 support for ease of...

Features * OpenRB-150 Starter Kit is a product consisting of OpenRB-150 and XL330-M288-T. * Batteries, USB Cables, and Power Cables are not included. OpenRB-150 Has the same pinout and form factor as the Arduino MKR, and supports...

This is a T-motor CubeMars AK10-9 V2.0 100KV Brushless DC Actuator Robot Joint Motor. Features: Highly Integrated & High Torque Module Reducer and Controller in One Large Torque Applied to Exoskeleton, Quadruped Robotic Dog Easy...

Easy to control and compact in size Integrated with encoder and driver Professionally applied for exoskeleton use The Cubemars AK60 6V1.1 KV80 Brushless DC Motor w/ Encoder & Driver for Robot is an ultra-light, high-integrated dynamic...

The T-Motor Brushless Motor AK70-10 is a highly integrated and high-torque module. The module weighs only 521 g, thin as 50.2 mm combined with efficiency and dynamic. This motor combines with a planetary gear solution and uses a 10:1...

BLDC Motor with Driver CubeMars AK80-64 KV80 – Upgrade Version NOTE: R-Link (A serial port module that works with AK motors) is not required, but it can help debug AK motors. We recommend R-Link to customers using AK motors for the first...

The AK80-8 planetary gear motor offers reduction ratio of 8:1, enabling it to adapt to various application scenarios and provide a wider range of motion control capabilities for your robots. Additionally, we take pride in our dual...

Features At A Glance The WAVE ROVER is a full metal body 4WD mobile robot chassis, which features superb off-road crossing ability and shock-absorbing performance, open source all code for secondary development. It supports multiple host...

Features At A Glance The UGV02 series is a 6 wheels × 4WD mobile robot chassis, which features superb off-road crossing ability and shock-absorbing performance, open source all code for secondary development. It supports multiple host...

Features At A Glance RoArm-M1 is a serial robotic arm with 5-DOF in total, including the clamping freedom of the gripper Two control methods in demo: Angle control and Coordinate control Supports Leading-following mode based on ESP-NOW...

Another version Jetson NANO DOFBOT AI Vision Robotic Arm This Raspberry Pi robotic arm is mainly composed of an aluminum alloy bracket, a sturdy chassis, a multi-function expansion board, 6 bus servos and a 300,000 pixel camera. We built...