OpenRB-150

₹2,899.00 *

Ready to ship today,
Delivery time appr. 1-3 workdays

Features The OpenRB-150 is a new open-source Arduino compatible embedded... more

Product information "OpenRB-150"

Features

The OpenRB-150 is a new open-source Arduino compatible embedded controller.

The controller has the same pinout and form factor as the Arduino MKR, and supports programming using the Arduino IDE.

It also features 4 dedicated DYNAMIXEL ports, and supports the DYNAMIXEL Wizard 2.0 for easy use and maintenance of DYNAMIXEL.

Package Components

Item	Quantity	Description
OpenRB-150	1	DYNAMIXEL Controller

* Batteries and cables are not included in this package.

H/W Specifications

MCU	SAMD21 Cortex-M0+ 32bit low power ARM®
Operating Voltage	5.0V (USB 3.0) 3.7V ~ 12.6V (VIN or Terminal)
Operating Temperature	-40℃ ~ 85℃
Allowable Current	3.0A (DYNAMIXEL Port)
Connector Types	USB C-Type, Terminal Block
DYNAMIXEL Ports (TTL)	JST B3B-EH-A(2), JST S3B-EH-A(2) [Max 1Mbps]
Dimensions	66 x 25 mm
Weight	13g

Pinout

How to Supply Power (3 Methods)

Power can be supplied to the OpenRB-150 in three ways depending on the voltage and serial communication type of DYNAMIXEL.

1. 5V TTL DYNAMIXEL

2. 12V TTL DYNAMIXEL

3. 12V RS-485 DYNAMIXEL

Compatible DYNAMIXEL

The OpenRB-150 is compatible with all DYNAMIXEL models.

However, additional equipment is required for use with the following types of DYNAMIXEL.

1. RS-485
The DYNAMIXEL Communication Bridge is required to convert signals.

2. 24V

A separate power supply is required.

3. DYNAMIXEL-AX and MX Series (Molex connectors)

A Molex-JST convertible cable is required.

Caution

1. The Arduino MKR board is not included in the package.

2. When supplying power, please check the jumper settings. (USB C Type, VIN, Terminal VIN)

3. Please do not charge the battery when it is connected to the controller.

4. Please check the power input terminal before connecting it to the controller.

Link