Features This is the RS-485 communication 4P cable set for Dynamixel X-series. This cable is used when connecting Dynamixel X-series to products using Molex connectors such as controller, U2D2 or USB2Dynamixel. Package Components ROBOT...

Features Used for 3P-5P conversion Used to connect sensors to the GP I / O port of the controller. Package Components 3P-5P Cable 150mm 5 Compatible Products Controller : CM-510, CM-530, CM-700 Sensor : Gyro Sensor GS-12, DMS Sensor DMS-80

Features 5P cable set for connecting sensor/motor. Used to connect sensors to the GP I / O port of the controller. Easy to use for those who want to attach a sensor to a big robot. Package Contents 5P Cable 400mm 4 Compatible Products...

Features The OpenCM9.04 board is required in order to use the OpenCM 485 Expansion Board. Please purchase the OpenCM9.04 Board separately. The OpenCM 485 Expansion Board connects to the OpenCM9.04 controller to connect DYNAMIXELS that...

Features Connector Set used for OpenCM9.04-A. Users can solder the desired part on the controller. Package Components 1x20 PIN Header Socket(Pitch 2.54mm) 2 1x20 BOX Header Socket(Pitch 2.54mm) 2 2x5 PIN Header Socket(Pitch 2mm) 2 1x4...

Features 5P Cable set for connecting Sensor/Motor. Used for connecting sensors with GP I/O port Package Components 5P Cable 150mm 4 Compatible Products Controller : CM-100, CM-150, CM-200, CM-510, CM-530, CM-700, OPEN CM-90.4 Sensor : IR...

Features Idler bearing set for DYNAMIXEL PRO used to a ssemble to the opposite side of the output shaft Has high strength due to metal processing, and therefore it does not bend or break easily Package Components FRP54-I110K 1 Wrench...

Features This is the communication 4P cable for DX/RX/EX-Series, MX-Series, PRO-Series, RS-485. Flexible sheath resists against breaking and peeling of the cable. High pull out force of the connector maintains stable connection. The...

Features This device provides power from the SMPS to the DYNAMIXEL. Connect the SMPS to the DC terminal and connect the DYNAMIXEL using the cable. 3P connector for AX series and 4P connector for DX/RX/EX series are mounted on the...

Features The ROBOTIS Dream Level 1 is an easy entry level robotics kit for learning and teaching the basics of robotics. Level 1 is also an educational robot kit designed for elementary school children ages 7 and up. One can learn about...

ROBOTIS DREAM Level 2 is an expansion kit . You will need to purchase ROBOTIS DREAM Level 1 Kit first or you will not be able to build the example robots for level 2. The ROBOTIS Dream Level 2 is an an expansion pack for Level 1. Easy...

Click on Software link below to download the RoboPlus Design software to see the 3D assembly manual.