Features Horn for RX-24F/28/MX-28. Includes Teflon washer. Has high durability of Output shaft. Package Components HN07-N101 1 Wrench Bolt WB M2.5x8 1 Wrench Bolt WB M2x3 10 Teflon washer 1 Compatible Products Compatible with RX-24F,...

Features Horn for RX-10/24F/28. Designed to be compatible with various frames. Package Components HN07-N1 1 Wrench Bolt WB M2.5x8 1 Compatible Products Compatible with RX-10, RX-24F, RX-28 NOT compatible with AX-Series, MX-28/64/106,...

Features DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. The DYNAMIXEL XH / XM-Series offers a variety of control techniques based...

Features HN12-N101 is the standard horn set for Dynamixel X-series 430 models. This horn set can be assembled on the output shaft wheel gear of Dynamixel X in order to assemble with frames such as a hinge or an adapter. Package...

Features This charger is intended for the Li-Po battery. Uses the SMPS for power when charging, thus it must be accompanied with the SMPS 12V 5A. Support 2S and 3S Cell charge. (Exception, does not charge simultaneously) Package...

Features This gear set is for Dynamixel MX-28. Made with metal and specially coated to strengthen endurance and durability of abrasion. A MX-28 exclusive magnet is attached to the wheel gear. There are 2 wheel bearings included. Package...

Features 2 way 2 pin cable used for Battery Box ABB-020. Can be used for replacement if the cable included in the battery box is damaged. Package Components 2P Cable 150mm for battery box 4 Compatible Products Controller : CM-100,...

Features 2 way 2 pin cable used for the Geared Motor. Can be used for replacement if the cable included in the Geared Motor is damaged. Package Components 2P Cable 150mm for Geared Motor 4 Compatible Products Controller : CM-100,...

Features Exclusive 3P cable for the USB Downloader LN-101. Can be used for replacement if the cable included in the USB Downloader LN-101 is damaged. Package Components LN-101 3P Cable 110cm 4 Compatible Products USB Downloader LN-101

Features This is the RS-485 communication 4P cable set for Dynamixel X-series. New style JST connector is applied on one side of the cable while old style Molex connector is applied on the other side. This cable is used when connecting...

Features This is the RS-485 communication 4P cable set for Dynamixel X-series. This cable is used when connecting Dynamixel X-series to products using Molex connectors such as controller, U2D2 or USB2Dynamixel. Package Components ROBOT...

Features Used for 3P-5P conversion Used to connect sensors to the GP I / O port of the controller. Package Components 3P-5P Cable 150mm 5 Compatible Products Controller : CM-510, CM-530, CM-700 Sensor : Gyro Sensor GS-12, DMS Sensor DMS-80