Top seller
No results were found for the filter!
Compass click Compass Click is an add-on board in mikroBUS form factor. It features LSM303DLHC ultra compact high performance e-compass module. It includes specific sensing element and an IC interface capable of measuring both linear acceleration...
₹2,629.00 *
Light click Light click is the add-on board with PD15-22CTR8 PIN photodiode, providing an effective and easy way to measure ambient light intensity. It also features MAX6106 voltage reference and MCP3201 ADC with SPI interface. Measured ambient...
₹1,889.00 *
Pressure click Pressure Click is a compact and easy solution for adding pressure measurement to your design. It features LPS331AP digital output pressure sensor. LPS331AP IC is an ultra compact absolute piezoresistive pressure sensor capable to measure...
₹2,629.00 *
GYRO click Gyro Click is an add-on board in mikroBUS form factor. It features L3GD20 three-axis digital gyroscope module capable of providing the measured angular rate, as well as ambient temperature. The L3GD20 has a full scale of ±250 / ±500 /...
₹2,629.00 *
Current click Current click is an add-on board used for measurement of electric current. It features INA196 current shunt monitor, MCP3201 12-bit ADC, MAX6106 voltage reference as well as two screw terminals. The click is designed to run either 3.3V...
₹2,519.00 *
IrThermo click 3.3V IrThermo Click 3.3V features MLX90614ESF-BAA single zone Infrared Thermometer module capable of non-contact temperature measurements. It is calibrated in wide temperature ranges: -40 to 85°C for the ambient temperature and -70 to +380°C...
₹3,049.00 *
IrThermo click 5V IrThermo Click 5V features MLX90614ESF-AAA single zone Infrared Thermometer module capable of non-contact temperature measurements. It is calibrated in wide temperature ranges: -40 to 85°C for the ambient temperature and -70 to +380°C...
₹3,049.00 *
LightHz click LightHz Click is an accessory board in mikroBUS form factor. Board features TSL230BR programmable light-to-frequency converter. The output can be either a pulse train or a square wave (50% duty cycle) with frequency directly proportional...
₹1,879.00 *
SHT1x click SHT11 Click is an accessory board in mikroBus™ form factor. It includes a digital humidity and temperature sensor SHT11 . A unique capacitive sensor element is used to measure relative humidity while the temperature is measured by a...
₹1,369.00 *
THERMO click THERMO click features the MAX31855K thermocouple-to-digital converter as well as PCC-SMP connector for K-type thermocouple probes . The click is designed to run on a 3.3V power supply. It communicates with the target MCU over an SPI...
₹3,049.00 *
Accel click Accel Click is an accessory board in mikroBUS form factor. It features ADXL345 3-axis accelerometer module with ultra-low power and high resolution (13-bit) measurement. Module supports several sensing functions such as single/double tap...
₹1,999.00 *
Angle click Angle click is a precise Hall-effect angle sensing click board that can be used to measure the rotational angle of the magnetic field in the X-Y plane above it (parallel to the surface of the click), through the whole range of 360°. The...
₹1,679.00 *
3D Hall 2 click 6DOF IMU 11 GSR click 3D Hall 6 Click Pressure 2 Temp-hum 11 Thermo 13 Click IR Sense 3 Heart Rate 3 Hall Current 5 Force click Manometer click ECG EMG sensors 6DOF IMU 4 Thermo J click Gyro 4 Click Opto Encoder NO2 click MOTION click Grid-EYE click FLAME click 6DOF IMU click 6DOF IMU 2 3D Motion click Heart Rate 7 ECG 3 Click ECG 4 Click 13DOF Click PIR Click HDC1000 click Pedometer 3 Angle 4 click Smoke click IR Sense 2 Manometer 2 Slider click Compass 2 click RTD click Color 3 click 3D Hall 7 click Hall Current 4 Pressure 8 Gyro 2 Click Accel 12 click IrDA 3 click LDC1101 click
Viewed