The WidowX Pan Tilt kit is a mid level pan tilt kit using the wildly popular MX-28 DYNAMIXEL smart servos. With a resolution of 0.088°, rotation range of 360°, stall torque of 25.5 kg·cm, and speed of 55rpm you get tremendous resolution...

The WidowX Pan Tilt kit is a mid level pan tilt kit using the wildly popular MX-64 DYNAMIXEL smart servos. With a resolution of 0.088°, rotation range of 360°, stall torque of 74 kg·cm, and speed of 78rpm you get tremendous resolution...

Easily link your project to a LiPo/Li-ion battery with the Battery Wiring Harness ! This harness is the same one we use in our Hexapod and Quadruped kits. Just attach the male Dean connector to any of our LiPo/Li-ion Batteries and the...

The ArbotiX Commander v2.0 is an Arduino compatible, open-source XBEE-wireless hand-held controller built specifically for controlling ArbotiX/NUKE powered walking robots (but it can be interfaced to virtually any microcontroller or PC)....

The 3 Pin DYNAMIXEL Cable Variety Pack is a great solution to building upon your existing, or creating a new project! The pack includes 5 different lengths of 3 pin cables- 60mm, 100mm, 150mm, 200mm, and 250mm. The 3 Pin DYNAMIXEL Cable...

The 6 Port AX/MX Power Hub is a must have accessory for any DYNAMIXEL user. This little board is a Bioloid 6 Port Hub and a SMPS adaptor all in one! The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring...

It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for,...

It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for,...

It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for,...

Sometimes a standard length cable is just too short. You just need cables for your latest custom creation, and a 250mm cable is just too short for this one. Enter the 350mm 3 Pin DYNAMIXEL Compatible Cable . This will get your project...

Sometimes a standard length cable is just too short. You just need cables for your latest custom creation, and a 250mm cable is just too short for this one. Enter the 500mm 3 Pin DYNAMIXEL Compatible Cable . This will get your project...

The PincherX 100 Robot Arm belongs to a new family of arms from Interbotix featuring the DYNAMIXEL X-Series Smart Servo Motors. The X-Series actuators offer higher torque, more efficient heat dissipation and better durability all at a...