Top seller
No results were found for the filter!
The external power supply should be connected to the VIN terminal, with the voltage between 2.5 and 5.5V. Smart Buck click provides two independent output voltage channels, each with the ability to output a regulated voltage in the range...
₹3,049.00 *
Advanced switching control of the TPS65131 with a self-learning feedback correction characteristic allows high efficiency and less dissipation. Low output voltage ripple reduces EMI, allowing the converter to be used for sensitive...
₹3,049.00 *
High integration rate of the Boost-INV click allows it to use a low number of external components. Advanced switching control of the LTC3582 allows very high efficiency and reduced EMI for using it in audio, or similar EMI sensitive...
₹2,209.00 *
This Click board™ is very useful for the development of applications that require programmed reduction of a wide input voltage range, so it can be used to power low voltage digital ICs. Features, such as the low dissipation due to high...
₹3,049.00 *
UPS click is a supercapacitor charger click that provides continuous power for a load connected to the output terminals. It also provides a temporary backup power supply in cases when the main power supply is abruptly disconnected -...
₹2,629.00 *
Nano Power click is a boost (step-up) DC-DC converter click with extremely high efficiency and very low input voltage, aimed at the low power IoT market and battery-powered sensors and other devices. The input voltage can be very low:...
₹1,159.00 *
This Click board™ is very useful for the development of applications that require programmed reduction of the input voltage, for various purposes. Features such as the low dissipation due to high efficiency, three different operating...
₹2,839.00 *
Nano Power 2 click is a very low power voltage comparator, aimed at portable and battery-powered applications. It allows detecting a difference of two voltage potentials, applied on two input pins. The device can detect differences very...
₹1,159.00 *
VREG 2 click is a voltage regulator click, with outstanding performances. It has a steady output voltage with the ripple lower than 5mV, short circuit protection with the LED indicator, and high efficiency with minimal power dissipation....
₹2,209.00 *
The TPS54200 supports analog and PWM dimming mode. In analog dimming mode, the internal reference voltage is scaled in the range from 1% to 100%. In the PWM dimming mode, the LED output is synchronized with the PWM control signal at the...
₹1,579.00 *
This device is capable of providing reasonably high current on the output. The frequency of the internal PWM oscillator is 500kHz, which ensures an optimal efficiency-to-size ratio. Buck-Boost 3 click offers a very tight output voltage...
₹2,839.00 *
Besides its protection features, MP9943 is also equipped with a soft-start function, and a sync option, making this Click board™ a very useful solution for the development of applications that require regulated 3.3V or 5V power supply....
₹2,209.00 *
VREG click Step Up Click UPS click BOOST 2 click Qi Receiver Balancer 5 LED driver 6 BUCK click Charger 8 click Buck-Boost 2 Solar energy Light Temp MIC24055 click Buck 9 Click Buck-Boost 3 Buck-Boost Step Down 2 Boost click Buck 8 click Buck 3 click Buck 12 Click Buck 11 click BUCK 7 click VREG 2 click Charger 11 Smart Buck Balancer 3 Nano Power LED Driver 5 Boost-INV 2 Charger 13 LED Driver 3 BATT-MON Click Boost 6 Click MIC33153 click MIC23099 click MIC24045 click MCP16331 click Buck 13 Click Buck 2 click Single Cell LED driver 2 BATT-MAN click Boost-INV click Boost 4 click BUCK 6 click
Viewed