Top seller
No results were found for the filter!
This Click board™ is optimized for driving brushed DC motors. it integrates an efficient H-Bridge with very low ON resistance of approximately 500m? through each branch. An integrated sleep mode is activated when both logic inputs are at...
₹1,889.00 *
Stepper 13 Click is a bipolar step motor driver. It features an H-bridge bipolar step motor driver, which supports full-, half-, quarter-, or eighth-step modes. Stepper 13 click also carries a port expander so that the communication can...
₹1,809.00 *
Silent Step Click is the complete integrated bipolar step motor driver solution, rich with many features that allow extremely smooth and silent operation of the connected motor while being able to provide up to 2.5A peak motor current...
₹2,899.00 *
Silent Step 3 Click is the complete integrated bipolar step motor driver solution, rich with many features that allow extremely smooth and silent operation of the connected motor while being able to provide up to 4A peak motor current...
₹3,259.00 *
DC Motor 11 Click is a brushed DC motor driver with the current limiting and current sensing. It is based on the DRV8830, an integrated H-Bridge driver IC, optimized for motor driving applications. It can be operated by two logic...
₹1,579.00 *
H-Bridge 3 Click is designed for the control of small DC motors and inductive loads, it features TLE9201SG a general purpose 6A H-Bridge perfectly suited for industrial and automotive applications. This IC meets the harsh automotive...
₹2,179.00 *
STSPIN250 click is a brushed DC motor driver with the current limiting and current sensing. It is based on the STSPIN250, a low voltage DC brushed motor driver. It is optimized for portable and low voltage applications, featuring the...
₹1,479.00 *
STSPIN220 click is a stepper motor driver with the PWM current control and selectable microstepping up to 256 microsteps. It is based on the STSPIN220, a low voltage stepper motor driver from STSPIN2 series. It is optimized for...
₹2,059.00 *
STSPIN820 click is a stepper motor driver with the PWM current control, selectable microstepping up to 256 microsteps, and a wide voltage range. It is based on the STSPIN820, a stepper motor driver from STSPIN8 series. Designed to be a...
₹2,059.00 *
Brushless 4 click is a 3 phase sensorless BLDC motor driver, which features a 180° sinusoidal drive, providing high efficiency and low acoustic noise. This type of drivers inherently provides higher torque in general, compared to...
₹1,999.00 *
Brushless 5 click is a 3 phase sensorless BLDC motor controller, with a soft-switching feature for reduced motor noise and EMI, and precise BEMF motor sensing, which eliminates the need for Hall-sensors in motor applications. It can...
₹1,999.00 *
DC Motor 8 click is a DC motor driver. It can drive simple DC motors with brushes, providing them with a significant amount of current and voltage up to 40V. The click has one control input, that uses the PWM signal from the host MCU. It...
₹1,889.00 *
Fan 3 click DC MOTOR 2 DC Motor 9 PWM driver DC MOTOR 5 H-Bridge 2 DC MOTOR 3 Stepper 4 click STSPIN820 click Brushless 3 STSPIN233 click STSPIN220 click DC Motor 11 H-Bridge 4 STSPIN250 click Silent Step 3 H-bridge 3 Servo click Vibro Motor Stepper 5 click Brushless 2 Brushless 4 HAPTIC click Brushless 6 DC MOTOR 4 DC MOTOR 7 Fan 4 click DC MOTOR click Fan 2 click Fan 6 click Silent Step H-Bridge 5 Fan click DC Motor 8 Brushless 5 DC Motor 10 Stepper 2 click Stepper 13 Driver click Stepper 3 click Stepper click Stepper 7 click H-Bridge click
Viewed