Top seller
No results were found for the filter!
ATA6570 click is a CAN Partial Networking interface board. The click carries the ATA6570 , a high-speed CAN transceiver that interfaces a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. This IC has...
₹2,419.00 *
The possibility to cascade more devices, as well as the ability to additionally fine-tune each PWM channel separately, compensating the brightness differences between the LED elements (dots), make PWM 2 click an ideal solution for...
₹1,999.00 *
iButton click - is an iButton™ probe Click board™. The iButton is a technology based on the 1-Wire® communication protocol, and a chip usually packed in a robust stainless steel casing. The button-shaped iButton device has two contacts -...
₹3,679.00 *
USB UART 3 click is a versatile and feature-rich USB to UART interface from Silicon Labs. It uses CP2102N which is a part of their USBXpress™ family. These devices are designed to quickly add a USB 2.0 full-speed compliant UART interface...
₹1,579.00 *
Besides this, MOSFETs can withstand up to 20V across their terminals (12V VGS), and supports far greater currents than the typical ICs, making them less likely to fail. The LLC circuitry, also known as the level translator or level...
₹949.00 *
Featuring a set of options for fine-tuning the 1-Wire ® bus performance, allowing it to accommodate to a wide variety of different applications, complex state machine which allow straight-forward conversion of characters sent over the...
₹2,309.00 *
RS-232 standard was introduced in ’60, as a serial interface between Data Terminal Equipment (DTE) and Data Communication Equipment (DCE). After undergoing several revisions, it is still used, even 60 years after it has been first...
₹2,519.00 *
The ADM2795E, as the main component of the RS485 4 click complies with many regulations: Level 4 EMC protection, IEC 61000-4-5 surge protection (±4kV), IEC 61000-4-4 electrical fast transient (EFT) protection (±2 kV), IEC 61000-4-2...
₹4,099.00 *
The physical layer is implemented by using a separate IC, which provides increased robustness, required for the automotive applications. It features three operating modes, remote wake-up via the CAN, and offers ideally passive behavior...
₹2,629.00 *
mikroBUS Shuttle is a small add-on board, which is intended to be used with Shuttle click , in order to expand the mikroBUS™ with additional stacking options. This small add-on board has one mikroBUS™ equipped on itself and it is...
₹839.00 *
The Feather is Adafruit’s standardized open source development platform for IoT projects. The Adafruit Feather & FeatherWing system consist of base board (Feather) and expansion boards (Wings). They are connected to each other over...
₹1,999.00 *
LPCXpresso is the development platform pioneered by NXP® and Embedded Artists. It includes low-cost LPCXpresso target boards which are designed for simple, rapid prototyping and evaluation. LPCXpresso development boards work with the MCU...
₹949.00 *
MCP2003B click SPI Isolator Expand 3 click RS485 click Fiber Opt click iButton click UART 1-Wire I2C Isolator 2 GNSS 10 Click USB I2C click UART I2C SPI PICtail Plus RS485 3 click ATA6563 click I2C Isolator USB SPI click Click MCP2518FD click USB UART 2 Arduino MEGA RS485 click 5V RS485 4 Click EXPAND click FRDM K64 click LPCXpresso Pi 4 Click DALI Click 4-20 mA T click DALI 2 click Arduino MKR FTDI click LLC SPI Click OBDII click RS232 Isolator Expand 4 click RS232 2 click PS 2 click Ambient 15 ETH WIZ click 1-Wire I2C Expand 2 click MCP2517FD click I2C 1-Wire BroadR-Reach PWM 2 click RS232 click
Viewed