Top seller
No results were found for the filter!
Charger 9 click
Charger 9 click is a Li-Ion (Li+, Li-Po) battery charger, capable of charging one, two or three battery cells. It is based on the MAX1757, an integrated Li+ battery charger with many features that allow safe and reliable charging. This...
₹2,899.00 *
Pressure 12 click
Pressure 12 click is a barometric gauge pressure measuring Click board™, equipped with the Amplified Basic Pressure sensor series (ABP), which features a ratiometric analog output, which is proportional to the applied pressure. It...
₹3,509.00 *
RTC 8 click
RTC 8 click is a real time clock module which has an extremely low power consumption, allowing it to be used with a single button cell battery, for an extended period of time. The RV-3028-C7 module built on the RTC 8 click is able to...
₹2,179.00 *
Presence click
Presence click is an infrared sensing Click board™ which can be used for presence sensing, motion detection, and a remote overtemperature protection. Presence click is equipped with the TPiS 1S 1385, a thermophile sensor from CaliPile™...
₹3,269.00 *
SwipeSwitch click
SwipeSwitch click is capacitive touch, gesture, and proximity sensing Click board™, which is equipped with the IQS266, an integrated trackpad controller circuit which features ProxSense® and IQ Switch® technologies. This IC consists of a...
₹1,809.00 *
WiFi BLE click
WiFi BLE click is a Click board™ which provides WiFi and BT/BLE connectivity for any embedded application. It features the ESP32-WROOM-32, an integrated wireless connectivity solution. The ESP32-WROOM-32 module itself is based on the...
₹2,209.00 *
Pressure 5 click
Pressure 5 click is a barometric pressure measurement Click board™, which features the BMP388, an accurate absolute barometric pressure sensor. Due to its very high sensing accuracy, it is perfectly suited for precise altitude tracking...
₹1,689.00 *
STSPIN250 click
STSPIN250 click is a brushed DC motor driver with the current limiting and current sensing. It is based on the STSPIN250, a low voltage DC brushed motor driver. It is optimized for portable and low voltage applications, featuring the...
₹1,479.00 *
STSPIN220 click
STSPIN220 click is a stepper motor driver with the PWM current control and selectable microstepping up to 256 microsteps. It is based on the STSPIN220, a low voltage stepper motor driver from STSPIN2 series. It is optimized for...
₹2,059.00 *
STSPIN820 click
STSPIN820 click is a stepper motor driver with the PWM current control, selectable microstepping up to 256 microsteps, and a wide voltage range. It is based on the STSPIN820, a stepper motor driver from STSPIN8 series. Designed to be a...
₹2,059.00 *
WiFi 10 click
WiFi 10 click is a Click board™ that offers an ultra-low power wireless connectivity, for any IoT application. It is based on the SX-ULPAN-SB-2401, an integrated wireless LAN module, compliant with the IEEE802.11a/b/g/n wireless...
₹2,629.00 *
NO2 2 Click
NO2 2 Click is a gas sensor Click board™, equipped with the MiCS-2714, a compact metal oxide (MOS) sensor. This sensor reacts to the presence of nitrogen dioxide (NO2) and hydrogen (H2). Its impedance changes as a result of a catalytic...
₹4,719.00 *
Smart Buck SPI Isolator IR Sense 2 GSR click BroadR-Reach 6DOF IMU 11 MCP2518FD click USB UART 2 RS485 Isolator LLC-I2C Click Expand 3 click USB SPI click USB UART 3 BUZZ 2 click USB UART 4 RFid click mikroBUS ATA663254 click M-Bus Master RS485 3 click ECG EMG sensors OBDII click 4-20 mA R click ATA6570 click Fiber Opt click CAN SPI click Brushless 4 4-20 mA T click I2C Isolator 2 Accel 6 click Heart Rate 7 Angle 4 click GPS Click Color 3 click Accel 12 click GNSS 7 click PWM click ETH Click SwipeSwitch LLC SPI Click CAN Isolator CAN SPI click OLED Switch RS485 click 5V 13DOF Click DALI Click
Viewed