Top seller
No results were found for the filter!
Hall Current 6 Click The ACS723 has a precisely trimmed analog output, which changes linearly with the applied current. Its accuracy is further optimized through the Allegro’s patented digital temperature compensation. Its excellent galvanic isolation...
₹1,889.00 *
Temp-Log 6 click The MAX6642 features a high accuracy of ±1°C within the range between +60°C and +100°C, which is a critical thermal bandwidth of most IC with the substrate PNP transistor as a temperature sensor. However, the Click board™ can be operated...
₹949.00 *
Proximity 8 click The Click board™ can detect objects regardless of their color, thanks to the VCSEL that emits a light beam with the wavelength of 940nm. This makes it also immune to a red glow. The current through the VCSEL can be programmed by the...
₹1,369.00 *
Accel 11 click With the total height of 1.10mm, the BMA456 is well suited for using it in wearable and handheld devices. Its powerful event detection engine is equipped with a set of features suitable for a wearable device, including step detection and...
₹1,789.00 *
Gyro 3 click The I3G4250 IC supports both I2C and SPI interfaces, which allows Gyro 3 click to be interfaced with a wide range of different MCUs. Although it is very sensitive (down to 0.008 dps/LSB) it is very resistant to shock and has a...
₹2,629.00 *
6DOF IMU 8 click The ISM330DLC is produced using well-proven microelectromechanical sensor (MEMS) manufacturing processes, along with the CMOS technologies that allow a high integration scale on a wafer level, providing good component matching and...
₹2,209.00 *
Ambient 6 click Thanks to the used proprietary technologies that allow high precision, reliability, and low power consumption, Ambient 6 click can be used for a rapid development of various cost-effective applications that rely on light intensity...
₹949.00 *
Ambient 8 click The LTR-329ALS-01 offers six programmable gain settings, ranging from 1x up to 96x. This allows operating flexibility, as the sensor can be used in both very bright and very dim environments. Ambient 8 click can be used for a rapid...
₹949.00 *
Temp-hum 11 click Built with the power consumption in mind, the HDC1080 is an ideal solution for IoT development. A common problem for all humidity sensors is the memory effect or a hysteresis after prolonged exposure to extreme RH values for prolonged...
₹1,369.00 *
Proximity 9 click The VCNL4040 also integrates some additional features for better reliability. It has an intelligent crosstalk cancelation scheme implemented, in order to reduce the crosstalk phenomenon. A smart persistence allows the interrupt engine to...
₹949.00 *
ECG 5 click Additional features of the AD8232 include HR LED indicator for visual feedback, adaptive high-pass filter for faster recovery, dedicated reference buffer for the virtual ground, and high ESD rating, up to 8kV human body model. All these...
₹3,679.00 *
SmartDOF click Built to be used as a simple solution, this 9 DOF SiP provides an output which can be used directly, with no tedious conversions required. Acting as a co-processor, it reduces the workload from the host MCU, allowing it to be used for...
₹2,729.00 *
13DOF Click BUCK click mikroC PRO for DALI 2 click Brushless 5 ETH Click CAN Isolator IRNSS Click ADC 4 click RS485 Isolator UART 1-Wire RS485 4 Click USB I2C click iButton click mikroC PRO for mikroBasic PRO LLC-I2C Click Excelon-LP MCP2517FD click RS232 click Opto 3 click BroadR-Reach OBDII click Hz to V 2 click FLAME click Thermo J click Buck 14 Click UART I2C SPI ATA6563 click CAP Slider 2 Step Down 2 RS232 Isolator Slider click RS232 2 click I2C Isolator Fiber Opt click Secure 6 Click Tester click mikroC PRO for DALI Click Buck-Boost 2 7x10 Y click BUCK 6 click MCP2518FD click mikroPascal PRO Opto Encoder 2
Viewed