Top seller
No results were found for the filter!
FRP54-H120K Set Features Aluminum hinge frame for DYNAMIXEL PRO 54 series. Has high strength due to metal processing, and therefore it does not bend or break easily Package Components FRP54-H120K 1 Wrench Bolt WB M3x8 20 Wrench Bolt WB M3x18 6 spring...
₹10,799.00 *
FRP54-H110K Set Features Aluminum hinge frame for DYNAMIXEL PRO 54 series. Has high strength due to metal processing, and therefore it does not bend or break easily Package Components FRP54-H110K 1 Wrench Bolt WB M3x8 20 Wrench Bolt WB M3x18 6 spring...
₹10,799.00 *
FRP42-H120K Set This is an optional hinge frame for DYNAMIXEL Pro servos using the 42 mm 2 form factor. The servo hinge frame is made from aluminum for high strength and durability. Package Contents 1 x FRP42-H120K Frame Hinge (Black) 20 x M3-8mm SHCS...
₹10,959.00 *
FRP42-H110K Set Features Optional adaptor frame for DYNAMIXEL PRO 42-Series. Has high strength due to metal processing, and therefore it does not bend or break easily. Package Components FRP42-H110K (Black) 1 Wrench Bolt WB M3x8 20 Caution Idler Bearing...
₹10,959.00 *
FRP54-A110K Set Features Optional frame for DYNAMIXEL PRO. . Adaptor for DYNAMIXEL PRO 54-series. Used for housing or output shaft of DYNAMIXEL PRO module. Has high strength due to metal processing, and therefore it does not bend or break easily....
₹4,969.00 *
FRP42-A110K Set Features Optional adaptor frame for DYNAMIXEL PRO 42-Series. Used for housing or output shaft of DYNAMIXEL PRO modules. Has high strength due to metal processing, and therefore it does not bend or break easily. Package Components...
₹4,699.00 *
BT-210 Features BT-210 is a device that enables serial communication (UART) via Bluetooth communication. BT-210 has a case that protects the circuits and a connector-type cable to connect the device onto the robot. Package Components BT-210...
₹4,409.00 *
ZIG-110A Set DESCRIPTION ZIG-110 is the small sized comm. module with built-in MCU and Zigbee IC inside. It is a PAN (Personaal Area Network) module which makes UART communication possible among modules by using 2.4 GHz frequency bandwidth. ZIG-100...
₹4,989.00 *
FR07-G101GM Set Features Gripper frame for DARwIn-OP, RX-10/24F/28, and MX-28. Can be applied on a Humanoid Robot, Manipulator, etc. in order to grip objects. Includes Bearing (HN07-I101 Set) and Screws so that it can be assembled with DYNAMIXEL. Has...
₹14,739.00 *
FR04-G101GM Set Features Grippers for AX series Same grippers as the ROBOTIS GP Package Components Description Qty Frame FR04-E170_GM (Gunmetal) 1 FR04-E171_GM (Gunmetal) 1 Bearing Washer 4 Busher 2 Screw Bolt PHS M2*6 20 Bolt PHS M3*10 2 Nut M2 10...
₹8,339.00 *
OpenCM9.04-C Features OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3. All hardware and software are disclosed. All Dynamixels can be controlled when using the accessory set of 485 expansion board. Uses USB Cable (Micro-B)...
₹2,669.00 *
FR12-H101K Set DYNAMIXEL DYNAMIXEL DYNAMIXEL FRP54-A110K Set ROBOTIS-OP CM-530 DYNAMIXEL OpenRB-150 DYNAMIXEL U2D2 Power Hub DYNAMIXEL DYNAMIXEL Dynamixel DYNAMIXEL Robot Cable-4P HN05-N102 Idler BIOLOID 3P TurtleBot4 ROBOTIS DREAM XC330-M288-T MX-106 Gear DYNAMIXEL PRO TurtleBot4 Dynamixel Dynamixel ZIG-110A Set DYNAMIXEL PRO DYNAMIXEL DYNAMIXEL U2D2 PHB Power DYNAMIXEL PRO FRP42-H120K Set Dynamixel Pro Magnetic Sensor TURTLEBOT3 DYNAMIXEL DYNAMIXEL RM-X52-TNM Plate SPD-2b15 FPX330-H101 Geared Motor U2D2_INT Joint-S LOCTITE 268 Sproket SPS-17
Viewed