Top seller
No results were found for the filter!
Buck 2 click is a powerful step down DC-DC switching regulator. It gives a high precision regulated voltage at its output and it can handle an ample amount of current. Buck 2 click is highly configurable - the output voltage, maximum...
₹2,729.00 *
LED Driver 3 click is an RGB LED driver, capable of driving RGB LEDs with up to 30mA per segment, via the digital I2C interface. It comes with an RGB LED onboard, and is capable of displaying a palette of 32768 colors. It features an...
₹1,579.00 *
Buck 3 click is a very advanced synchronous step-down (buck) converter, which is designed to deliver noise and ripple-free voltage to highly sensitive applications, such as FPGA and high-performance DSP platforms. The onboard step-down...
₹2,309.00 *
The external power supply should be connected to the VIN terminal, with the voltage between 2.5 and 5.5V. Smart Buck click provides two independent output voltage channels, each with the ability to output a regulated voltage in the range...
₹3,049.00 *
Advanced switching control of the TPS65131 with a self-learning feedback correction characteristic allows high efficiency and less dissipation. Low output voltage ripple reduces EMI, allowing the converter to be used for sensitive...
₹3,049.00 *
High integration rate of the Boost-INV click allows it to use a low number of external components. Advanced switching control of the LTC3582 allows very high efficiency and reduced EMI for using it in audio, or similar EMI sensitive...
₹2,209.00 *
This Click board™ is very useful for the development of applications that require programmed reduction of a wide input voltage range, so it can be used to power low voltage digital ICs. Features, such as the low dissipation due to high...
₹3,049.00 *
UPS click is a supercapacitor charger click that provides continuous power for a load connected to the output terminals. It also provides a temporary backup power supply in cases when the main power supply is abruptly disconnected -...
₹2,629.00 *
Nano Power click is a boost (step-up) DC-DC converter click with extremely high efficiency and very low input voltage, aimed at the low power IoT market and battery-powered sensors and other devices. The input voltage can be very low:...
₹1,159.00 *
This Click board™ is very useful for the development of applications that require programmed reduction of the input voltage, for various purposes. Features such as the low dissipation due to high efficiency, three different operating...
₹2,839.00 *
Nano Power 2 click is a very low power voltage comparator, aimed at portable and battery-powered applications. It allows detecting a difference of two voltage potentials, applied on two input pins. The device can detect differences very...
₹1,159.00 *
VREG 2 click is a voltage regulator click, with outstanding performances. It has a steady output voltage with the ripple lower than 5mV, short circuit protection with the LED indicator, and high efficiency with minimal power dissipation....
₹2,209.00 *
MINI-M4 for mikroLAB for Tamper 2 click RS232 SPI click MCU CARD 2 FOR IrDA 3 click MCU CARD 16 FOR mikroLAB for MAX232 Boards OBDII click IR Sense 2 BIG8051 GSR click PT100 3-wire GPS Click Solar Panel mikroLAB for RS485 4 Click 32x32 RGB LED NANO GPS click mikromedia for ECG EMG cable AnyNet 3G-AA 6LoWPAN T click LV-32MX v6 6DOF IMU click I2C to SPi 13DOF Click 3G-AA Click MCU CARD FOR mikroBoard for Arduino MKR DHT22 2 click Analog System Vibro Motor LED Driver 3 6LoWPAN C click WiFi2 click RS232 click PS 2 click Active GPS Clicker 2 for DC MOTOR 3 Flip Click Pedometer 3 Let s make -
Viewed