Products from Emlid

Autopilot HAT for Raspberry Pi powered by ArduPilot and ROS — Navio2 — Connector for RPi — 4x spacers — 8x M2.5 screws Turn your Raspberry Pi® into a drone controller GNSS receiver Tracks GPS, GLONASS, Beidou, Galileo and SBAS...

RTK GNSS receiver with an app as a controller Centimeter accuracy for surveying, mapping and data collection. GNSS GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS Long range radio LoRa 868/915 MHz, range up to 8 km 30 hours battery life...

Reach RS+ Cable 2M With DB9 Female Connector Compatible with the original Reach RS.

Reach RS+ Cable 2M w/o 2nd Connector Compatible with the original Reach RS.

Reach RS+ Cable 2M With DB9 Male Connector Compatible with the original Reach RS.

Reach M+ Antenna Extention Cable 2M Compatible with the original Reach module.

Reach M+ TNC Antenna Adapter Cable 2M Compatible with the original Reach module.

Tallysman TW4721 is a compact, wideband Accutenna™ technology GNSS antenna that provides accurate reception for all upper L- band GPS, GLONASS, Beidou, and Galileo signals (L1, G1, B1, B1 BOC, B12, E1) and associated augmentation signals...

This antenna is not compatible with NEO6-T USB dongle. Antenna type: active (LNA built-in) Supported navigation satellite systems: GPS, GLONASS Dimensions: 45 x 35 x 15 mm Cable length: 300 mm Connector type: MCX Mounting: adhesive...

Supports LiPo batteries up to 6S Max current sensing: 60 A* Switching regulator output: 5.3 V 2.25 A 6-pos DF13 cable for connection to Navio2 power port *power module can sense current up to 90A if different connectors are used (XT60...

Includes : 2xDF13 6-pin to 2.54 mm female jumpers for UART and ADC ports 1xDF13 4-pin to 2.54 mm female jumpers for I2C port Wire length: 200 mm.