Products from Luxonis

Overview : The OAK-FFC-6P baseboard has 6 FFC interfaces which allows for six 2-lane MIPI camera modules. It is the first device from OAK Series 3 (Keem Bay VPU) and uses the OAK-SoM-Max. To see which cameras are compatible with this OAK...

Overview : The OAK-FFC-pToF is a carrier board for the Sunny MTP006 pTOF camera module, and is designed to be compatible with OAK-FFC-3P, OAK-FFC-4P, and DepthAI RPi HAT baseboards. It’s currenty in beta stage so you have to use a custom...

Key Features: Support for FFC Gen2 and Arducam DepthAI camera modules 4 FFC camera sockets are available Interface for Luxonis 2099 SoM USB 3.1 Gen1 Type-C Passthrough Power-over-Ethernet (PoE) power source 1000BASE-T ethernet for data...

The OAK-D-IoT-40 is the Embedded/IoT design of OAK-D. It can be used completely standalone, or via USB with a host like normal USB-only variants of DepthAI. It has a built-in ESP32 which provides WiFi, Bluetooth (including BLE), as well...

Overview : OAK-SoM-IoT is an embedded variant of OAK-SoM that includes a 128MB NOR flash, and boot-switch capabilities such that it can be booted over USB (for use with our Python API) or set to boot out of NOR-flash, for communication...

Important technical note: Note! This product is for development purposes and has to be hand calibrated. Please see the documentation for more information. The optics on these early development models have no filtering and are "wide open"...

Overview : The OAK-D Pro W PoE has Wide Field of View (FOV) cameras and features an IR laser dot projector (active stereo) and IR illumination LED (for night-vision). The OAK-D Pro W PoE is from the Series 2 of OAK cameras . Compared to...

Overview The OAK-D-IoT-40 baseboard has three on-board cameras which implement stereo and RGB vision, piped directly into the OAK-SoM-IoT for depth and AI processing. The data can be then output to a host via USB 3.1 Gen1 (Type-C) or via...

Overview : The OAK-D S2 is the Series 2 version of the OAK-D . The main difference is that OAK-D S2 has a smaller enclosure and is therefore lighter. OAK-D S2 also doesn’t have a barrel jack for supplying power, it only has a USB-C...

Overview : The OAK-D Pro is an upgraded version of OAK-D , featuring an IR laser dot projector (active stereo) and IR illumination LED (for night-vision). OAK-D Pro is from the Series 2 of OAK cameras . It’s smaller and lighter than the...

OAK-D-SR emphasizes improved short-range accuracy when compared to the standard OAK-D. To ensure the best accuracy, it's recommended to keep the depth measurement range of the OAK-D-SR between 20cm and 80cm. It's perfect for applications...

Camera module with 32MP attachable via flexible flat cable to any of the OAK-FFC 3P and OAK-FFC 4P base boards, perfectly suited for quick prototyping. Sensor: IMX582 Type: Rolling Shutter DFOV / HFOV / VFOV: 71° / 45° / 55° Resolution:...