Top seller
No results were found for the filter!
GSM Click Precision control GSM click is the easiest way to add GSM/GPRS communication to your device. The click features Telit's GL865-QUAD module. GSM click runs either on 3.3V or 5V power supply and communicates with the target microcontroller...
₹5,149.00 *
BEE click BEE click features MRF24J40MA 2.4 GHz IEEE 802.15.4 radio transceiver module from Microchip. The click is designed to run on 3.3V power supply only. It communicates with the target microcontroller over an SPI interface. BEE click is an...
₹3,049.00 *
Bluetooth click With the range up to a 100m and low power consumption, Bluetooth click is a great solution if you are looking for a simple way to integrate Bluetooth 2.1 communication to your device. It features the RN-41 low power, class 1 Bluetooth...
₹4,099.00 *
GPS Click GPS click is a compact solution for adding GPS functionality to your device. It carries the u-blox LEA-6S high-performance position engine. The click is designed to run on a 3.3V power supply and communicates with the target MCU through...
₹5,149.00 *
IrDA2 click IrDA2 click is a compact and easy solution for adding infrared communication to your device. It features TFDU4101 infrared transceiver module as well as MCP2120 infrared encoder/decoder from Microchip connected with the 7.3728 MHz...
₹2,719.00 *
WiFi PLUS click WiFi PLUS click is a compact solution for adding WiFi communication to your project. The click features MRF24WB0MA – 2.4GHz, IEEE std. 802.11 - compliant module from Microchip, as well as MCW1001 companion controller with on-board TCP/IP...
₹4,729.00 *
WiFi3 click WiFi3 click is a complete self-contained WiFi solution carrying the ESP8266 module with a system on a chip. The click is designed to run on a 3.3V power supply only. It communicates with the target board microcontroller through the...
₹2,839.00 *
NB IoT Click How does it work NB IoT click is equipped with the BC95-G module from Quectel Wireless Solutions , which supports LTE NB1 technology, developed with IoT applications in mind. It supports several NB frequency bands: B1, B3, B5, B8, B20,...
₹5,459.00 *
LTE IoT click SMA connector on board for the RF antenna, network and status indicators, familiar u-Blox AT commands set over the UART interface, USB connector for interfacing it with m-center software application from u-Blox , are just some of the...
₹8,299.00 *
SigFox 2 Click (NA & Asia) Activate your Sigfox 2 click by using the ID and PAC numbers which you can find on the package box of your SigFox Click board™. Find out more about the Sigfox network coverage and other related information. Learn about the next steps for...
₹2,629.00 *
SigFox click (Europe) Activate your Sigfox click by using the ID and PAC numbers which you can find on the package box of your SigFox Click board™. Find out more about the Sigfox network coverage and other related information. Learn about the next steps for...
₹2,629.00 *
LTE IoT 2 Click Two SMA connectors on board for the main and the secondary (GNSS) antennas, network and status indicators, familiar 3GPP standard AT commands set, as well as the Quectel enhanced AT commands over the UART interface, USB connector for...
₹7,249.00 *
BLE P click EnOcean 3 Click IQRF click ccRF 3 click BEE click CC3100 click ccRF2 click IQRF 2 click nRF C click LTE IoT click LoRa click NFC click RN4678 click EnOcean 2 click NFC Tag 2 click WiFi 9 Click BLE 3 click RN4871 click GNSS2 click GNSS click 4G LTE-NA click GSM2 click EnOcean click BT Audio click WiFi 5 click LoRa 2 Click 3G-AA Click tRF click WiFly click Bluetooth click IrDA2 click WiFi 6 Click LTE CAT.1-EU WiFi BLE click AnyNet 2G click WiFi3 click 4G LTE-APJ Go To Cloud G2C WiFi ESP click MiWi click LoRa 3 click 4G LTE-E click AnyNet 3G-EA MPU 9DOF Click GNSS 5 click 3G-EA Click Eu
Viewed