Products from Digilent

Building on the previous successes with the WF32, the Wi-FIRE uses the same 43 available I/O pins, 12 analog inputs, 3.3 operating voltage, 4 user LEDs, potentiometer, buttons, uses MRF24 on-board wireless module, microSD Card, dedicated...

The Cmod MX1 is a MPIDE compatible board from Digilent. It combines a Microchip ® PIC32MX150F128D microcontroller with a convenient 600-mil, 40-pin DIP package and two Digilent Pmod ports. Digilent's Cmod boards are ideally suited for...

The Digilent Pro MX7 is a microcontroller development board based on the Microchip ® PIC32MX795F512L, a member of the 32-bit PIC32 microcontroller family. It is compatible with Digilent's line of peripheral modules (Pmod) , and is...

The Basys MX3 Lab Bundle provides all of the necessary hardware for following along with the Basys MX3 and PIC32MX370 Embedded Systems Coursework. The kit includes the motors and external power supply needed to round out the embedded...

The WF32 is a prototyping platform that adds the performance of the Microchip ® PIC32 microcontroller. The WF32 is the first board from Digilent to have a WiFi MRF24 and SD card on the board both with dedicated signals. The WF32 board...

In this book, Chuck Hellebuyck, author of many entry-level technical books, shows you how to get started with the chipKIT™ Uno32 using very simple example projects. These projects demonstrate the use of digital inputs & outputs, analog...

The Universal Development Board (UDB) is a microcontroller development board intended for use with a wide variety of PIC microcontrollers from Microchip ® . It was designed to support most 3.3V, PIC microcontrollers in 8-bit, 16-bit, or...

ZedBoard is a low-cost development board for the Xilinx Zynq - 7000 all programmable SoC (AP SoC). This board contains everything necessary to create a Linux ® , Android ® , Windows ® , or other OS/RTOS based design. Additionally,...

The Basys 3 is an entry-level FPGA development board designed exclusively for Vivado Design Suite , featuring Xilinx Artix-7 FPGA architecture. Basys 3 is the newest addition to the popular Basys line of FPGA development boards, and is...

Arty is a ready-to-use development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. It was designed specifically for use as a MicroBlaze Soft Processing System. When used in this context, Arty...

The PYNQ-Z1 board is designed to be used with PYNQ, a new open-source framework that enables embedded programmers to exploit the capabilities of Xilinx Zynq All Programmable SoCs (APSoCs) without having to design programmable logic...

This kit contains an SDSoC voucher that is only for use with the Zybo. Includes Xilinx ® SDSoC Zynq Development Voucher, USB cable, 5V power supply, 8GB microSD card. Designs using embedded linux may consume more power than sourced from...