Products from Digilent
No results were found for the filter!
This kit contains an SDSoC voucher that is only for use with the Zybo. Includes Xilinx ® SDSoC Zynq Development Voucher, USB cable, 5V power supply, 8GB microSD card. Designs using embedded linux may consume more power than sourced from...
₹3,809.00 *
ZedBoard is a low-cost development board for the Xilinx Zynq - 7000 all programmable SoC (AP SoC). This board contains everything necessary to create a Linux ® , Android ® , Windows ® , or other OS/RTOS based design. Additionally,...
₹57,999.00 *
Quickly add Grove modules to your PYNQ projects with a choice of a Grove Shield or a Grove Adapter. The Grove System simplifies traditional electronics by removing the messy, time-consuming effort with breadboarding. The Grove system...
₹729.00 *
Quickly add Grove modules to your PYNQ projects with a choice of a Grove Shield or a Grove Adapter. The Grove System simplifies traditional electronics by removing the messy, time-consuming effort with breadboarding. The Grove system...
₹1,459.00 *
The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM,...
₹8,659.00 *
The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM,...
₹13,319.00 *
The Digilent Cmod S6 is a small, 48-pin DIP form factor board built around a Xilinx ® Spartan ® -6 LX4 FPGA. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, and basic...
₹7,969.00 *
Clear, sleek covers made out of plexiglass specifically designed to protect your PYNQ-Z1 . The covers are easily attached to the PYNQ-Z1 using the four included stand-offs along with eight screws, protecting the top and bottom of the...
₹859.00 *
The Nexys Video (previously announced as the Atlys 2), is the latest addition to our Nexys line of FPGA boards, and was designed with audio/video enthusiasts in mind. The Nexys Video features several components that make it ideal for...
₹58,119.00 *
The Basys 3 Pmod Pack was designed to complement features of the Basys 3 FPGA, allowing users to expand project possibilities by utilizing a variety of peripheral modules! The Basys 3 Pmod Pack includes the Pmod ALS, Pmod AMP2, Pmod...
₹8,009.00 *
The Zybo Pmod Pack was designed to complement features of the Zybo Zynq-7000 FPGA, allowing users to expand project possibilities by utilizing a variety of peripheral modules! The Zybo Pmod Pack includes the Pmod BT2, Pmod ALS, Pmod...
₹8,629.00 *
The Arty Z7 is a ready-to-use development platform designed around the Zynq-7000™ All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with...
₹22,979.00 *
Rivet-Mg n 1pcs Carbon Fiber Magnesium Ion Robot Actuator GNSS L1 L5 RTL-SDR BLOG V3 SiPy Multipack Ettus USRP B210 Premium Silicon Enclosure Kit Developer kit Ettus USRP B210 Disposable ECG Intel Iot Ettus USRP Carbon Fiber Communications RJ11 6-Pin TMD2771 Ambient Carbon Fiber Gravity Analog Nvidia Jetson Arty A7-35T Enclosure Kit PIC18F2550 Ettus USRP OAK-D-Lite HD Ettus USRP N210 CUAV V5 Nano UART Bluetooth Verbal Machines OAK-D LR AK80-6 With EZO-O2 Embedded Carbon Fiber Premium Silicon Crydom CX240D5 Alchitry Cu WAVE ROVER Carbon Fiber Basys 3 Artix-7 Premium Silicon Fingerprint MSP430FR2355 NVIDIA Jetson
Viewed