Products from Waveshare Electronics

264x176, 2.7inch E-Ink raw display, three-color, SPI interface, without PCB. This is an E-Ink raw display, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color...

1200x825, 9.7inch E-Ink raw display, parallel port, without PCB. This is an E-Ink raw display, 9.7inch, 1200x825 resolution, communicating via parallel port. Due to the advantages like ultra low power consumption, wide viewing angle,...

640x384, 7.5inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface. This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports red, black,...

296x128, 2.9inch E-Ink display module, yellow/black/white three-color, SPI interface. This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and...

200x200, 1.54inch E-Ink display module, SPI interface. This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra...

600x448, 5.83inch E-Ink raw display, red/black/white three-color, SPI interface, without PCB. This is an E-Ink raw display, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface, supports red, black, and...

The RPi Relay Board (B) is an expansion board with 8-ch relays for Raspberry Pi. It gives your Pi the ability to control high voltage products such as home appliances. Features Supports Raspberry Pi A+/B+/2B/3B/3B+ High quality relays,...

Driver Breakout for micro:bit, drives motors and servos. This driver board gives your micro:bit the ability to drive two channel DC motors and three channel servos. It's an ideal choice for you to DIY mobile robots. Features micro:bit...

Motor Driver HAT for Raspberry Pi, I2C Interface. The Motor Driver HAT is designed for Raspberry Pi, controlled via I2C interface, will drive two DC motors at the same time. It's an ideal choice for you to DIY mobile robots. Features...

AlphaBot2 robot building kit for micro:bit. This AlphaBot2 robot kit is designed to use with the BBC micro:bit (not included). It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging,...

AlphaBot2 robot building kit for micro:bit, with controller BBC micro:bit. This AlphaBot2 robot kit is designed to use with the BBC micro:bit. It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic...

Power over Ethernet HAT for Raspberry Pi 3 Model B+, 802.3af power-sourcing equipment required. The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3...