Products from SparkFun Electronics
No results were found for the filter!
Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power and control cable is...
₹1,189.00 *
This is the SparkFun GPS Shield Kit, a great launch pad for anyone looking to get into the world of GPS. This little kit includes our GPS Shield, an EM-506 GPS Receiver with interface cable, and a set of R3 headers to solder onto the...
₹7,019.00 *
Want to sound like a robot? The HT8950 is a single chip CMOS LSI voice modulator ICs which provide seven steps to shift the frequency of an input voice, producing a dramatic change in the output. The HT8950 provides two special effects:...
₹449.00 *
There’s nothing worse than getting ready for a good hack and then realizing that you can’t even get the box open because you don’t have the right screwdriver. Sure, we all have a few Phillips-head drivers and maybe a few slotted drivers...
₹809.00 *
This is a simple soldering iron stand composed of a heavy-duty metal base and a reinforced spring holder. The base and holder are detachable. A circular cleaning sponge, which has a nice home at the bottom of the base, is included. This...
₹579.00 *
The RHT03 (also known by DHT-22) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn’t require extra components so you can get right to measuring relative humidity and...
₹989.00 *
These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot as long as you provide the appropriate voltage. Simply apply 5VDC to the wire leads and within minutes, the pad will...
₹389.00 *
Servos are awesome for robotics projects but they can be difficult to mount the way you want. Luckily, our brilliant Ministry of Machinery has spun up these plastic servo mounts.
₹49.00 *
This is a basic 8 character by 2 line display with black text on green background. The screen utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available. You will need ~11 general I/O pins to...
₹649.00 *
The MPR121QR2 IC is a great way to build simple capacitive touch interfaces, and now it’s even easier to incorporate into your Arduino projects with the touch shield. The touch shield has 9 capacitive touch pads, with headers for the...
₹1,419.00 *
This charger accurately balances and charges Lithium Polymer, LiFe (A123), NiCd and NiMH batteries. It will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates...
₹3,369.00 *
The TSL235R light-to-frequency converter outputs a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance). The device has been temperature compensated for the ultraviolet-to-visible light range...
₹289.00 *
NVIDIA Jetson OAK-D-Lite Auto Hailo-8 M.2 AI LED Cycling RGB Carbon Fiber Female Crimp Active GPS Adafruit 7-Segment Adafruit GNSS L1 L5 Ettus USRP B210 Atlas Pixhawk Jetson Adafruit FONA - Ettus USRP Enclosure Kit OAK-D LR Pixhawk 4 - NVIDIA Jetson Enclosure Kit AK80-6 With Ettus USRP B210 Tiva C Series LDR Light Solar Panel NI Multisim Micro Maestro Analog Ettus USRP EasyAVR v7 Analog Premium Silicon DYNAMIXEL ARDUINO NANO 33 Adafruit Micro SD Card Carbon Fiber Color Sensor Google AIY Nvidia Jetson JetRacer AI Kit AT89C51 8-Bit Google AIY Premium Silicon OAK-D-Lite HD
Viewed