Products from SparkFun Electronics

Close filters
 
from to
24 From 55
No results were found for the filter!
RFID Tag - Adhesive Mifare 1K (13.56 MHz)
RFID Tag - Adhesive Mifare 1K (13.56 MHz)
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a...
₹289.00 *
SparkFun FTDI Basic Breakout - 3.3V
SparkFun FTDI Basic Breakout - 3.3V
This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial...
₹1,549.00 *
SparkFun Arduino Pro Mini 328 - 3.3V/8MHz
SparkFun Arduino Pro Mini 328 - 3.3V/8MHz
It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any...
₹989.00 *
SparkFun Interface Pack for Intel® Edison
SparkFun Interface Pack for Intel® Edison
The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength...
₹6,519.00 *
Jumper Wire - JST Black Red
Jumper Wire - JST Black Red
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 130mm length
₹89.00 *
JST Jumper 3 Wire Assembly
JST Jumper 3 Wire Assembly
This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST....
₹149.00 *
EL Wire Chasing Adapter Cable
EL Wire Chasing Adapter Cable
This is an Chasing EL Wire Adapter Cable, a simple connector that splits up the four wires in a Chasing EL wire allowing them to be individually powered or controlled. On one side of this cable is a 4-pin JST SMP connector that can be...
₹169.00 *
EL Wire - Blue 3m (Chasing)
EL Wire - Blue 3m (Chasing)
EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! Each EL wire looks a lot like a thin flexible neon tube and they come in many bright colors which can be driven...
₹1,119.00 *
Heating Pad - 5x15cm
Heating Pad - 5x15cm
These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot as long as you provide the appropriate voltage. Simply apply 5VDC to the wire leads and within minutes, the pad will...
₹489.00 *
EL Wire - Blue-Green 3m (Chasing)
EL Wire - Blue-Green 3m (Chasing)
EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! Each EL wire looks a lot like a thin flexible neon tube and they come in many bright colors which can be driven...
₹1,119.00 *
SparkFun Sunny Buddy - MPPT Solar Charger
SparkFun Sunny Buddy - MPPT Solar Charger
This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other...
₹2,689.00 *
SoftPot Membrane Potentiometer - 200mm
SoftPot Membrane Potentiometer - 200mm
These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip....
₹1,229.00 *
24 From 55
Viewed