Products from SparkFun Electronics

Do not look into the light. You know you want to, but boy will you be sorry. 1W per channel, RGB High Power LEDs in one aluminum backed package. These LEDs will blow you away. Light them up then put a coffee cup over the LED to keep your...

Yes you read that correctly - 1 Farad capacitor. This small cap can be charged up and then slowly dissapated running an entire system for hours. Combine two in series for 0.5F/5V. Do not over voltage or reverse polarize these capacitors.

We know what you’re thinking, “What’s the big deal? Looks like an SD card…” Well this is no SD card! The Electric Imp is a WiFi enabled development platform powered by a Cortex-M3 processor core. “Really?” Yup. In essence, the Imp...

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA. It is...

The PowerCell board is a single cell LiPo boost converter (to 3.3V and 5V) and micro-USB charger in one. The board comes with a JST connector for a single cell LiPo battery, a micro-USB connector for the 5V charge input, and selectable...

This is a super-high intensity Luxeon Rebel LED, warm white in color. These LEDs provide optimized light quality and efficiency to address a number of project needs, including LED illumination. These LEDs can be blindingly bright and...

This is a rippled wide lens from Carlco Optics. Combine this lens with our Luxeon Rebel LEDs to control where the light is going and how bright it is. This lens produces a rippled beam with a 24° beam angle. It has a diameter of 20mm....

This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applications and can be used...

The TTS256 is an 8-bit microprocessor programmed with letter-to-sound rules. This built-in algorithm allows for the automatic real-time translation of English ASCII characters into allophone addresses compatible with the Magnevation...

The uLog is a tiny analog datalogger. Central to the logger is an ATtiny24 mated with an AT45DB161D 16Mbit flash IC. Sampling at 50Hz, it’ll log 3 channels of 10-bit ADC for about 2 hours before the memory fills up. Very stripped down...

This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and long battery life. It can drive an 8-Ohm speaker at up to 1.4 Watts; it won’t shake a stadium, but it will provide...

The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an SM5100B cellular module. This allows you to easily add SMS, GSM/GPRS, and TCP/IP functionalities to your Arduino-based project. All you need...