Products from Robotis

Features Aluminum hinge frame for DYNAMIXEL PRO 54 series. Has high strength due to metal processing, and therefore it does not bend or break easily Package Components FRP54-H120K 1 Wrench Bolt WB M3x8 20 Wrench Bolt WB M3x18 6 spring...

Features Aluminum hinge frame for DYNAMIXEL PRO 54 series. Has high strength due to metal processing, and therefore it does not bend or break easily Package Components FRP54-H110K 1 Wrench Bolt WB M3x8 20 Wrench Bolt WB M3x18 6 spring...

This is an optional hinge frame for DYNAMIXEL Pro servos using the 42 mm 2 form factor. The servo hinge frame is made from aluminum for high strength and durability. Package Contents 1 x FRP42-H120K Frame Hinge (Black) 20 x M3-8mm SHCS...

Features Optional adaptor frame for DYNAMIXEL PRO 42-Series. Has high strength due to metal processing, and therefore it does not bend or break easily. Package Components FRP42-H110K (Black) 1 Wrench Bolt WB M3x8 20 Caution Idler Bearing...

Features Optional frame for DYNAMIXEL PRO. . Adaptor for DYNAMIXEL PRO 54-series. Used for housing or output shaft of DYNAMIXEL PRO module. Has high strength due to metal processing, and therefore it does not bend or break easily....

Features Optional adaptor frame for DYNAMIXEL PRO 42-Series. Used for housing or output shaft of DYNAMIXEL PRO modules. Has high strength due to metal processing, and therefore it does not bend or break easily. Package Components...

Features BT-210 is a device that enables serial communication (UART) via Bluetooth communication. BT-210 has a case that protects the circuits and a connector-type cable to connect the device onto the robot. Package Components BT-210...

DESCRIPTION ZIG-110 is the small sized comm. module with built-in MCU and Zigbee IC inside. It is a PAN (Personaal Area Network) module which makes UART communication possible among modules by using 2.4 GHz frequency bandwidth. ZIG-100...

Features Gripper frame for DARwIn-OP, RX-10/24F/28, and MX-28. Can be applied on a Humanoid Robot, Manipulator, etc. in order to grip objects. Includes Bearing (HN07-I101 Set) and Screws so that it can be assembled with DYNAMIXEL. Has...

Features Grippers for AX series Same grippers as the ROBOTIS GP Package Components Description Qty Frame FR04-E170_GM (Gunmetal) 1 FR04-E171_GM (Gunmetal) 1 Bearing Washer 4 Busher 2 Screw Bolt PHS M2*6 20 Bolt PHS M3*10 2 Nut M2 10...

Features OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3. All hardware and software are disclosed. All Dynamixels can be controlled when using the accessory set of 485 expansion board. Uses USB Cable (Micro-B)...