Products from Pololu Electronics

This dual brushed DC motor driver, based on Freescale’s MC33926 full H-bridge, has a wide operating range of 5 – 28 V and can deliver almost 3 A continuously (5 A peak) to each of its two motor channels. The MC33926 works with 3 – 5 V...

This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped...

This gearmotor is a miniature high-power, 6 V brushed DC motor with a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm...

This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This...

This is the main base plate for the Romi chassis, including the battery cover, in black . It is included as part of the black Romi Chassis Kit. Note Without batteries

This item is a pair of motor-holding clips for the Romi chassis in black . These clips snap into the main Romi base plate, and then the motors snap into the clips. It is included as part of the black Romi Chassis Kit. Note Combined...

This item is a set of three plastic rollers, a 1″-diameter plastic ball, and a retaining clip that can be used on the front or back ball caster locations on the Romi chassis base plate. The ball is white, and all other parts are black ....

These white plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and...

This set of six battery contacts completes the six AA battery holder molded into the Romi chassis base plate. A set is included in each Romi Chassis Kit. Notes Combined weight of all six contact pieces.

This compact, inexpensive plastic gearmotor ( high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range....

This is the main base plate for the Romi chassis, including the battery cover, in white . It is included as part of the white Romi Chassis Kit. Notes: Without Batteries.

This product is a carrier board or breakout board for ON Semiconductor’s AMIS-30543 Micro-Stepping Motor Driver; we therefore recommend careful reading of the AMIS-30543 datasheet (495k pdf) before using this product. This stepper motor...