Products from MikroElektronika

Secure click carries the ATECC508A cryptographic coprocessor with secure hardware-based key storage. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface....

EERAM 5V click is a static RAM (SRAM) memory click board™ with the unique feature - it has a backup non-volatile memory array, used to store the data from the SRAM array. Since the SRAM is not able to maintain its content after the power...

EERAM 3.3V click is a static RAM (SRAM) memory click board™ with the unique feature - it has a backup non-volatile memory array, used to store the data from the SRAM array. Since the SRAM is not able to maintain its content after the...

The high-performance Flash chip operates at 50MHz at Normal and 133MHz at Fast Read speeds. It is specified to standard 100,000 erase/program cycles with more than 20 years of data retention. The data can be erased in sectors or blocks...

EEPROM 3 click provides 2 Mbit (2,097,152 bits) of Electrically Erasable Programmable Read Only Memory, organized in bytes. In other words, this click board™ is an EEPROM memory medium with the capacity of 256 KB. The used EEPROM module...

EEPROM2 click provides 2 Mbit (2,097,152 bits) of Electrically Erasable and Programmable Read Only Memory, organized in bytes. In other words, this Click board™ is an EEPROM memory medium with the capacity of 256 KB. The used EEPROM...

SRAM click lets you add 1 Mbit of additional SRAM memory to your devices, via the 23LC1024 chip. It organizes the memory in 8-bit instruction registers and 32-byte pages. Three operating modes for reading and writing data are available:...

FRAM click brings 256K (32,768 words x 8 bits) of Ferroelectric Random Access Memory to your design. It features MB85RS256A module which uses the ferroelectric process and silicon gate CMOS technologies for forming the nonvolatile memory...

Need more additional memory? We’ve got just the thing for you - microSD click. It features a microSD card slot for microSD cards used as a mass storage media for portable devices. microSD click is designed to run on 3.3V power supply....

EEPROM click is an accessory board in mikroBUS form factor. It features 24C08WP - a highly reliable, high performance CMOS technology serial 8K EEPROM in DIP packaging. It offers significant advantages in low-power and low-voltage...

Flash Click is an accessory board in mikroBUS form factor. It’s a compact and easy solution for adding flash memory to your device. It features EN25Q80B - 8Mb serial Flash memory module with advanced hardware write protection mechanisms....

Secure 4 click includes the ATECC608A , a secure CryptoAuthentication™ device from Microchip , which is equipped with an EEPROM array which can be used for storing of up to 16 keys, certificates, consumption logging, security...