Top seller
No results were found for the filter!
ccRF 3 click ccRF 3 click carries the CC1120 high-performance RF transceiver for narrowband systems from Texas Instruments. The clicks will enable you to add a low-power consumption radio transceiver at 433 MHz frequency . ccRF 3 click is designed to...
₹3,779.00 *
SPIRIT click SPIRIT click carries the SP1ML 868MHz ultra low-power RF module. The board is designed to use 3.3V power supply and 3.3V or 5V I/O voltage levels. It communicates with the target MCU over UART interface, with additional functionality...
₹4,099.00 *
GSM/GNSS 2 click GSM/GNSS 2 click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click carries SIM868 quad-band GSM/GPRS module. GSM/GNSS 2 click is designed to run on either 3.3V or 5V power supply. It...
₹7,249.00 *
WiFi ESP click WiFi ESP click carries the ESP-WROOM-02 module that integrates ESP8266EX. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over UART interface and the following pins on the mikroBUS™...
₹1,579.00 *
GSM/GNSS click GSM/GNSS click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click features Quectel’s MC60 quad-band module. GSM/GNSS click runs on either 3.3V or 5V power supply and communicates with...
₹8,299.00 *
GNSS 4 click GNSS 4 click carries SAM-M8Q patch antenna module from u-blox. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C or UART interface. What is GNSS? GNSS stands for Global...
₹4,619.00 *
NFC Tag 2 click NFC Tag 2 click carries the NT3H1101 NTAG I2C energy harvesting NFC Forum Type 2 Tag from NXP. The click is designed to run on a 3.3V power supply only. It communicates with the target MCU over I2C interface and the INT pin (field...
₹1,259.00 *
EnOcean 2 click EnOcean 2 click carries the TCM 515Z transceiver, based on the 2.4 GHz IEEE 802.15.4 radio standard. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over UART interface. This...
₹4,099.00 *
GSM 4 click GSM 4 click is a mikroBUS™ add-on board that features the u-blox SARA-G3 series 2.5G GSM/GPRS cellular quad-band module. The SARA-G3 module has a miniature LGA (Land Grid Array) form factor as well as an RF transceiver and a power...
₹5,149.00 *
BT Audio click Bluetooth class 2 radio and DSP processor combined Microchip’s RN52 Bluetooth audio module delivers high quality audio in small form factor (26.0 mm x 13.5 mm x 2.7 mm). The module combines a class 2 Bluetooth radio and an embedded DSP...
₹5,149.00 *
BLE 3 click Built-in RTC saves additional energy One of the standout features of the NINA-B1 module is its real time counter functionality. This counter can be used to generate precisely timed BLE advertising events (broadcasting packets to every...
₹4,289.00 *
NFC click NFC click is a mikroBUS™ add-on board with a versatile near field communications controller from NXP — the PN7120 IC . NFC devices are used in contactless payment systems, electronic ticketing, smartcards, but also in retail and...
₹3,569.00 *
SPI Isolator OBDII click M-Bus Master Accel 6 click Matrix RGB UART I2C SPI GSR click 13DOF Click USB I2C click LTE Cat.1-US I2C Isolator BroadR-Reach Color 2 Click TFT Designer Expand 3 click DALI Click MCP2542 click RS232 2 click CAN SPI click ETH Click Expand 4 click I2C Isolator 2 MCU card with mikroPascal PRO BarGraph 3 ETH WIZ click RS485 Isolator RS232 click HVAC Click IR Sense 2 mikromedia Plus mikromedia for Expand 2 click Opto Encoder Heart Rate 7 TFT Designer mikroC PRO for MAGNETO click Cap Touch 2 mikroBasic PRO PS 2 click Vibra sense 3D Hall 3 Click Nano GPS 2 EasyPIC FUSION 6DOF IMU 4
Viewed