Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
19 From 37
No results were found for the filter!
INA118
INA118
The INA118 is a low-power, general-purpose instrumentation amplifier offering excellent accuracy. The device’s versatile, 3-op amp design and small size make it ideal for a wide range of applications. Current-feedback input circuitry...
₹839.00 *
GPIO Header for Raspberry Pi A+/B+/Pi 2/Pi 3 - 2x20 Female Header
GPIO Header for Raspberry Pi A+/B+/Pi 2/Pi 3 -...
Connect your own PCB to a Raspberry Pi B+ with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with our...
₹109.00 *
Female Header Pack - R2
Female Header Pack - R2
This pack of female headers includes two 6-pin headers and two 8-pin headers. This is similar to the header kit that comes with Arduino shields except that the pins are shorter so they don’t stack. These are useful for Arduino compatible...
₹79.00 *
Raspberry Pi 3 IoT Learner Kit
Raspberry Pi 3 IoT Learner Kit
This kit is desigened specially for https://www.coursera.org/learn/developer-iot What's included - 1. Raspberry Pi 3 2. Raspberry Pi Sense HAT 3. 16 GB Class 10 NOOBS SD Card 4. Power Supply - 5V 2.1A 5. Raspberry Pi case 6. HDMI cable...
₹10,579.00 *
SMD Coin Cell Battery Holder CR1220
SMD Coin Cell Battery Holder CR1220
The S8411-45R is a surface mount Coin-cell Battery Holder/Retainer with PPS housing and phosphor bronze contact base with gold-plated finish. Low profile design available with dual independent contact points for enhanced electrical...
₹39.00 *
Heat shrink tube 4" - 1.5mm
Heat shrink tube 4" - 1.5mm
Use heat shrink to reinforce connections, protect devices, and electrically isolate exposed electronics. Generally used to bundle wires and very commonly used to seal electrical joints and prevent wire joints from corrosion & abrasion....
₹9.00 *
Heat shrink tube 4" - 3mm
Heat shrink tube 4" - 3mm
Use heat shrink to reinforce connections, protect devices, and electrically isolate exposed electronics. Generally used to bundle wires and very commonly used to seal electrical joints and prevent wire joints from corrosion & abrasion....
₹19.00 *
Heat shrink tube 40mm - 1mm -Yellow
Heat shrink tube 40mm - 1mm -Yellow
Use heat shrink to reinforce connections, protect devices, and electrically isolate exposed electronics. Generally used to bundle wires and very commonly used to seal electrical joints and prevent wire joints from corrosion & abrasion....
₹9.00 *
Heat shrink tube 40mm - 2mm -Blue
Heat shrink tube 40mm - 2mm -Blue
Use heat shrink to reinforce connections, protect devices, and electrically isolate exposed electronics. Generally used to bundle wires and very commonly used to seal electrical joints and prevent wire joints from corrosion & abrasion....
₹9.00 *
Heat shrink tube 40mm - 3mm - Green
Heat shrink tube 40mm - 3mm - Green
Use heat shrink to reinforce connections, protect devices, and electrically isolate exposed electronics. Generally used to bundle wires and very commonly used to seal electrical joints and prevent wire joints from corrosion & abrasion....
₹9.00 *
Heat shrink tube 40mm - 4mm - Red
Heat shrink tube 40mm - 4mm - Red
Use heat shrink to reinforce connections, protect devices, and electrically isolate exposed electronics. Generally used to bundle wires and very commonly used to seal electrical joints and prevent wire joints from corrosion & abrasion....
₹9.00 *
Heat shrink tube 40mm - 6mm - Yellow
Heat shrink tube 40mm - 6mm - Yellow
Use heat shrink to reinforce connections, protect devices, and electrically isolate exposed electronics. Generally used to bundle wires and very commonly used to seal electrical joints and prevent wire joints from corrosion & abrasion....
₹9.00 *
19 From 37
Viewed