Top seller
No results were found for the filter!
Pmod BT2: Bluetooth Interface The Pmod BT2 is a powerful peripheral module employing the Roving Networks ® RN-42 to create a fully integrated Bluetooth interface. Users can communicate with the chip via UART and can also use the secondary SPI header on the board for...
₹3,519.00 *
Pmod ACL: 3-axis Accelerometer The Pmod ACL is a 3-axis digital accelerometer module that provides input to a system board. Communication via SPI or I 2 C with the on-board Analog Devices ADXL345 allows the user to access up to 13 bits of acceleration data, indicating...
₹1,439.00 *
Pmod BTN: 4 User Pushbuttons The Pmod BTN gives users four momentary pushbuttons for easy user inputs to a system board. Features: Four momentary pushbuttons Debouncing filters Inverting Schmitt Triggers Small PCB size for flexible designs 1.2“ × 0.8” (3.0 cm × 2.0...
₹769.00 *
Pmod GYRO: 3-axis Digital Gyroscope The Pmod GYRO is a 3-axis gyroscope powered by the STMicroelectronics L3G4200D . By communicating with the chip through SPI or I 2 C, users may configure the module to report angular momentum at a resolution of up to 2000 dps at an...
₹1,919.00 *
Pmod DA2: Two 12-bit D/A Outputs The Pmod DA2 is a 12-bit Digital-to-Analog converter powered by the Texas Instruments DAC121S101. As it is able to simultaneously convert two separate channels of digital information provided over an interface similar to SPI, users can...
₹1,929.00 *
Pmod CON1: Wire Terminal Connectors The Pmod CON1 is a small module with six screw terminals to interface with external wires that are not compatible with the DIP standard. Two of the terminals can be used to provide power from an outside source and the other four can be...
₹559.00 *
UART Crossover Cable Features: 6", 6-pin crossover cable Connects newer UART-interface Pmods (PmodBT) to older microcontroller boards (Cerebot 2, Cerebot 32MX4, etc.) Connects older UART-interface Pmods (PmodCLS, PmodRS232, etc.) to newer microcontroller...
₹559.00 *
Pmod HB5: H-bridge Driver with Feedback Inputs The Pmod HB5 offers a 2A H-bridge circuit to drive small to medium sized DC motors. Two sensor feedback pins are incorporated into the motor connection header and are specifically designed to work with the Digilent motor/gearbox, which...
₹1,539.00 *
Pmod TMP3: Digital Temperature Sensor The Pmod TMP3 is an ambient temperature sensor built around the Microchip TCN75A . Users may configure the output through I 2 C to up to 12 bits of resolution as well as setting a trigger to occur when a user defined temperature...
₹1,249.00 *
Pmod RTCC: Real-time Clock / Calendar The Pmod RTCC is a real-time clock/calendar powered by the Microchip ® MCP79410. Through the I 2 C interface, users may configure up to two alarms that can be triggered at a wide variety of possible times. Note: The Pmod RTCC is also...
₹1,439.00 *
Pmod CON3: R/C Servo Connectors The Pmod CON3 can be easily used to interface with up to four small servo motors that deliver anywhere from 50 to 300 ounce/inches of torque, such as those used in radio controlled airplanes or cars, as well as some mechatronics...
₹559.00 *
Pmod R2R: Resistor Ladder D/A Converter The Pmod R2R is resistor ladder with a R-2R resistor configuration. Users can provide 8-bits of parallel data to the module through GPIO signals. This setup teaches users the basic principles behind a Digital-to-Analog Converter....
₹479.00 *
Ettus USRP Digital Pmod CON1 Wire Pmod CON3 R C Current and FeeTech FS5103R Nexys A7-50T Ettus USRP B210 Tail Skid Enclosure Kit Pmod SD Zybo Z7-20 with Pmod HYGRO JTAG-HS3 Genesys 2 Enclosure Kit Pmod R2R Ettus USRP N210 MCC 134 JTAG-SMT2 Pmod AD1 Two Trenz TE0802 Analog Pmod DA3 One Pmod ISNS20 20A Pmod JSTK2 Ettus USRP NI Multisim Analog Ettus USRP B210 VRM Voltage Zybo Z7 MCC USB-205 NetFPGA-SUME Analog Basys 3 Artix-7 Arty A7-35T PYNQ-Z1 Max32 Pmod HB3 Pmod DA4 Eight myProto JTAG-USB Cable Pmod COLOR Cmod A7-35T Cmod A7-15T
Viewed