Top seller
No results were found for the filter!
Pmod TMP2: Temperature Sensor The Pmod TMP2 is an ambient temperature sensor powered by the Analog Devices ® ADT7420 . Through the I 2 C interface, users may appreciate a resolution of 0.0078°C through 16 bits of data. Features: 16-bit ambient temperature sensor...
₹1,439.00 *
Pmod HB3: H-bridge Driver with Feedback Inputs The Pmod HB3 is a 2A H-Bridge module. This module includes a separate pin header in addition to the standard 6-pin header to receive any external motor feedback signals. The H-Bridge can be driven through GPIO signals. Features: 2A...
₹959.00 *
Pmod DA3: One 16-bit D/A Output The Pmod DA3 is a 16-bit Digital-to-Analog converter powered by the Analog Devices AD5541A . The single ended SMA output provides a clean, guaranteed monotonic analog output from the provided information given through an interface...
₹3,749.00 *
Pmod RF2: IEEE 802.15 RF Transceiver The Pmod RF2 adds RF communication through the Microchip ® MRF24J40 IEEE 802.15.4™ 2.4GHz RF transceiver module. By communicating with the device through SPI, users can transmit data at speeds up to 625 kbps through the ZigBee ® , MiWi™,...
₹1,639.00 *
Pmod LED: Four High-brightness LEDs The Pmod LED has four user LEDs that are individually driven through logic-level transistors. Features: 4 high-bright red LEDs Clearly visible logic level indicators Required driving current of Small PCB size for flexible designs 0.8“ ×...
₹669.00 *
Pmod TPH: 6-pin Test Point Header The Pmod TPH offers 6 external pin headers so that users can easily test the GPIO signals passing through each of the pins. Features: 6 external test point headers Easily access and test signals passing through Small PCB size for...
₹669.00 *
Pmod STEP: Stepper Motor Driver The Pmod STEP provides a four channel drive for a stepper motor via the ST L293DD . Users may wire two pairs of channels in series to drive up to 600 mA of current per channel and can view the current status of a GPIO signal through a...
₹1,709.00 *
Pmod DPOT: Digital Potentiometer The Pmod DPOT is a digital potentiometer powered by the Analog Devices' AD5160. Users may set a desired resistance between 60Ω and 10kΩ by programming the chip through SPI. Features: Uses the Analog Devices AD5610 Digital potentiometer...
₹1,249.00 *
Pmod NIC100: Network Interface Controller The Pmod NIC100 is designed to provide a complete Ethernet interface featuring the Microchip ® ENC424J600 Stand-Alone Ethernet Controller. The ENC424J600 provides integrated MAC and PHY support, so Ethernet functionality can be added to...
₹2,349.00 *
Pmod DIP: DIP to 12-pin Pmod Adapter The Digilent Pmod DIP is a 12-pin dual in-line package (DIP) that also includes a 2×6 female Pmod header, allowing users to easily separate and process any signals traveling to and from their 12-pin Pmod. It allows for easy use of...
₹619.00 *
Pmod DA1: Four 8-bit D/A Outputs The Pmod DA1 is an 8-bit Digital-to-Analog Converter powered by two Analog Devices AD7303 . With simultaneous dual outputs per single input, users can perform up to four isolated tests on the analog outputs. Users may provide data to the...
₹2,119.00 *
Arty Pmod Pack The Arty Pmod Pack was designed to complement features of the Arty FPGA board, allowing users to expand project possibilities by utilizing a variety of peripheral modules! The Arty Pmod Pack includes the Pmod ACL, Pmod ALS, Pmod AMP2,...
₹9,879.00 *
Analog FeeTech FS5103R Basys 3 Artix-7 Ettus USRP B200 Arty A7-35T Ettus USRP Zybo Z7 NI Multisim MCC 134 Ettus USRP B210 Pmod JSTK2 Analog Zybo Z7-20 with Genesys 2 Pmod DA3 One NetFPGA-SUME PYNQ Version Max32 Enclosure Kit Current and Pmod DA4 Eight Ettus USRP N210 Ettus USRP Pmod R2R Pmod CON3 R C Cmod A7-15T myProto JTAG-HS3 Pmod CON1 Wire Analog Digital Pmod HYGRO Enclosure Kit Pmod DPOT Nexys A7-50T Pmod AD1 Two Pmod COLOR Ettus USRP B210 Pmod SD JTAG-USB Cable MCC USB-205 Pmod ISNS20 20A Digilent Tail Skid PYNQ-Z1 JTAG-SMT2
Viewed