Products from Digilent

Get your students quickly involved in building essential electronic circuits using myParts Kit supported by the Texas Instruments ® University Program. The set of key components in the myParts Kit encourages hands-on experimentation with...

Features: Convenient breadboard for constructing small circuits Self-adhesive backing One 300 tie-point terminal strip Two 50 tie-point distribution strips 3.25 x 2.125 inches

Features: Convenient breadboard for constructing small-to-medium circuits Self-adhesive backing - can be affixed to any surface 1x 630 tie point terminal strip 1x 100 tie point distribution strip 1.75 x 4.5 inches

The 2x6 Digital Discovery signal cable assembly, or flywire, is the same assembly that ships with every Digital Discovery we sell. The 2X6 flywire features two VCCIO_USR wires (red), two GND wires (black), and eight signal wires...

These micro-hook test clips allow the Analog Discovery, Digital Discovery, or OpenScope MZ's signal wires to be connected to component leads, wires, and other circuit components. The spring-action clips use two-lead pincers to grab onto...

The Breadboard Adapter is intended to be used with the Analog Discovery tool to provide a prototyping surface with a secure connection. It provides a female header to pass through all connections from the Analog Discovery 2 as well as a...

The High Speed Adapter, for the 32-pin connector on the Digital Discovery , is an alternative to the 2X16 flywire assembly . It provides access for up to 24 High Speed Logic Probes and allows increased sample rates for up 800 MS/s on the...

Contextual Electronics is an online course designed to teach you how to design custom electronics. The first course of its kind, this “online apprenticeship” pairs theory and practice and has students designing electronics from scratch...

The 2x16 Digital Discovery signal cable assembly, or flywire, is the same assembly that ships with every Digital Discovery we sell. This assembly features a 2x16 keyed female pin connector for the DIN_USR connector, with 24 DIN signals...

The High Speed Logic Probes come in a pack of four twisted cables. Each cable has a GND (black) wire twisted to a DIN_USR (colored) wire. The wire connects to the High Speed Adapter via a 2-pin female header, and two 1-pin female...

The Impedance Analyzer for Analog Discovery was designed with automatically adjusting reference resistors and relays to aid in use of the Impedance Analyzer tool in WaveForms. With the Impedance Analyzer accessory, the Analog Discovery...

Features: Acts as a female-to-male gender changer for a 2x6 pin female header or cable Can connect any two Digilent 2x6 pin cables together Provides easy access for test and measurement Ships in a pack of 5