Products from DF Robot (DFR)

INTRODUCTION This high quality, low profile, pure copper heatsink is a perfect solution for cooling off small surface-mount components such as stepper motor drivers, SOCs or a LattePanda . The pure copper increases heat dissipation and...

INTRODUCTION The WiFi Bee MT7681 is an Arduino WiFi XBee module based on the MT7681 serial Wi-Fi module . It is compatible with an XBee slot, supports Arduino wireless programming and is ideal for Internet of Things (IoT), home...

INTRODUCTION The bionic robot hand is made up of acrylic material. It consists of 5 micro metal servos, joints and one hand base. The special mechanical structure makes every finger can be controlled separately, all can move in certain...

INTRODUCTION The bionic robot hand is made up of acrylic material. It consists of 5 micro metal servos, joints and one hand base. The special mechanical structure makes every finger can be controlled separately, all can move in certain...

INTRODUCTION This time we reinvented the line-tracking sensor. Beyond recognizing two specific colors or output through digital or analog only, the Smart Gray Sensor has integrated both digital and analog output features. In digital...

INTRODUCTION The Analog Signal Isolator can isolate analog signal and provide isolated power to sensors. It can effectively prevent sensor signal interference and apply to multi-parameter water quality monitoring sensors. Because usually...

INTRODUCTION This is Gravity 4Pin sensor adapter which is special designed for 4Pin sensor. We have optimized its connection interface to make it compatible with gravity interface. And the press type terminal will provide you a good...

INTRODUCTION This is an Arduino digital infrared distance sensor. It has an adjustable detection range, 0cm - 200cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line,...

INTRODUCTION micro:bit is a pocket-sized microcontroller designed for kids and beginners learning how to program, letting them easily bring ideas into DIY digital games, interactive projects and robotics. micro:bit comes with a variety...

INTRODUCTION This is an Arduino-compatible TDS sensor/Meter Kit for measuring TDS value of the water, to reflect the cleanliness of the water. It can be applied to domestic water, hydroponic and other fields of water quality testing. TDS...

INTRODUCTION This spear tip pH sensor/meter kit can directly stab into semisolid material to measure the pH value. It can be used to measure pH value of wet soil and various foods. The pH value of the soil is an important factor...

INTRODUCTION This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test. The SHT20...