cytron

Cube Joint looks similar to Cube Servo but it is not a servo. It is one of the various joint available that you may need in robot construction. Usually you need it when you wish to change orientation of a servo's output. Document: 2D...

₹429.00 *

Claw

This part can be used as a claw to create a scorpion robot.

₹309.00 *

Double Spacer

Double Spacer only works on rero Controller's slots. They can work as a spacer to fix the Adapter Joint at the position you desired.

₹39.00 *

Single Spacer

Single Spacer only works on rero Controller's slots. They can work as a spacer to fix the Adapter Joint at the desired position.

₹39.00 *

Wire Clip

This part works in rero robots as 'hangers' to tidy up your wires.

₹79.00 *

Male to Female Extension Cable (L)

Extension wire is for extending the Cube Servo or sensors wire in case it is not long enough. Male connector can be connected to Female connector and vice versa. Extension length: 10cm

₹129.00 *

Male to Male Extension Cable (L)

Extension wire is for extending the Cube Servo or sensors wire in case it is not long enough. Male connector can be connected to Female connector and vice versa. Extension length: 11cm

₹129.00 *

Male to Female Extension Cable (S)

Extension wire is for extending the Cube Servo or sensors wire in case it is not long enough. Male connector can be connected to Female connector and vice versa. Extension length: 6cm

₹129.00 *

Male to Male Extension Cable (S)

Extension wire is for extending the Cube Servo or sensors wire in case it is not long enough. Male connector can be connected to Female connector and vice versa. Extension length: 7cm

₹129.00 *

Output Connect

Output Connect is the rotating part of Cube Servo that transmitting torque to the other rero parts. This part usually needs to sustain the highest impart in your system and has high tendency to break no matter how we strengthen it. But...

₹39.00 *

Products from cytron