Products from Atlas Scientific

Although it is a common measurement, accurately reading pH is very difficult. Atlas Scientific’s EZO-pH circuit gives engineers the ability to read pH with the same accuracy and capabilities that were traditionally only found in...

If you are new to electrochemical sensing, knowing what components you need can get confusing. Let us help you. The Atlas Scientific EZO-pH Kit gives you everything you need to take high accuracy, interference-free readings. Once you...

This Atlas Scientific Lab Grade pH probe is our highest accuracy pH probe. The internal double junction lets you read the pH of protein rich solutions without damaging the probe. The green EXR glass tip makes pH sensing in highly pure...

This Industrial pH Probe can be fully submerged in fresh water or salt water, up to the tinned leads indefinitely. • 1 IXIAN™ pH Transmitter • 1 Industrial pH Probe • 3 250ml (8oz) calibration solutions (pH 4, pH 7 and pH 10) • 1 125ml...

Designed for industrial process control, the Atlas Scientific industrial pH probe has all the capabilities of our lab-grade pH probe and more! Because the probe is larger, it holds more internal electrolyte. This means it has a life...

Reads pH Range .001 − 14.000 Accuracy +/– 0.002 Calibration 1, 2, 3 point(remotely though PLCor directly on board) Supported probes Any type & brand Temp probe PT-100 or PT-1000 Auto Temp compensation Yes Mount 35mm Din rail Output 4 −...

• pH 10.00 • Works with any pH Probe • 125ml (4oz) or 250ml (8oz) • ±0.02 pH at 25°C • Standardized against NIST-certified references • 2 year shelf life at room temperature

• pH 4.00 • Works with any pH Probe • 125ml (4oz) or 250ml (8oz) • ±0.02 pH at 25°C • Standardized against NIST-certified references • 2 year shelf life at room temperature

• pH 7.00 • Works with any pH Probe • 125ml (4oz) or 250ml (8oz) • ±0.02 pH at 25°C • Standardized against NIST-certified references • 2 year shelf life at room temperature

Reads pH Range 0.001 − 14.000 Resolution 0.001 Accuracy +/– 0.002 Response time 1 reading every 420ms Supported probes Any type & brand Calibration 1, 2, 3 point Temp compensation Yes Data protocol SMBus/I2C Default I2C address 0x65...

Did you let your pH probe dry out? (don’t worry; you’re not the only one) Do you have a $12 pH Probe that you bought from ebay that isn't working correctly? Maybe that Probe you have has seen better days. Before you throw it away, think...

• pH Probe Storage Solution • 125ml (4oz) • 2 year shelf life at room temperature