Products from MGSL

Solid-state system (no rotating components) Can be used in applications such as AGV obstacle avoidance FOV 132*9°, works under 60k lux Accuracy: ≤6cm / Detecting Range: 0.1~4m Optimized obstacle avoidance mode Outputs a single point data...

The TFMini is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 30 centimeters and as far as 12 meters! As with all LiDAR sensors, your effective detection distance will vary depending on...

YDLIDAR X4 LIDAR is a 360-degree two-dimensional laser range scanner (LIDAR). This product is based on the principle of triangulation distance measurement, together with the relevant optical, electrical, algorithm design, to achieve...

YDLIDAR F4 360 degree scanning up to 12 meters. YDLIDAR F4 efficiently scans every object within scanning range. Scanning Sample Rage = 6000 times/sec. This product is based on the principle of triangulation distance measurement,...

YDLIDAR G4 LIDAR is a 360-degree two-dimensional laser range scanner (LIDAR). This product is based on the principle of triangulation distance measurement, together with the relevant optical, electrical, algorithm design, to achieve...

Overview : PSoC 4 an ARM based PSoC PSoC 5LP programmer and debugger Power supply system Bluetooth interface Arduino compatible headers Digilent Pmod compatible header PSoC 5LP GPIO header CapSense slider Pioneer board LEDs Push buttons...

Description Do you have some liquids that you need to move? This fluid pump will move 350 gallons per hour! The SEAFLO mini water pump has a heavy duty 12V,motor and a tough thermoplastic body. It’s totally submersible and water-cooled...

The Charmed Labs Pan/Tilt Kit for Pixy 2 CMUcam5 Image Sensor makes a great “hello world” application for Pixy2. It’s easy to assemble and it gives your Pixy2 something to do: look around! The pan-tilt mechanism for Pixy2 is redesigned....

uArm Swift Pro uArm Swift series are consumer-level desktop robotic arms which are developed for makers and STEAM educationpurposes. Based on Arduino, uArm Swift series is open-source and DIY friendly. It’s extremely easy to use, almost...

Description The AT&T IoT Starter Kit (2nd Gen.) integrates LTE Cat-4 connectivity, GPS location tracking, User Application Processor plus sensors, into a slim form-factor, System-on-Module IoT solution, suitable for system prototyping as...

Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water until they turn clear and then kneading them...

Description This is a 0.96 inch blue OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64. The package includes display board,display, 6 pin male...