Top seller
No results were found for the filter!
myProto Protoboard for NI myDAQ & myRIO The Digilent myProto accessory board for the NI myDAQ and NI myRIO brings all your myDAQ/myRIO's signals to breadboard connections where they can be easily accessed using simple jumper wires, and even adds several useful I/O devices. The...
₹5,999.00 *
Shield Adapter (Uno R3) for NI myRIO With the Shield Adapter for NI myRIO , you can now connect your myRIO to the expansive shield options offered by the Arduino ecosystem. The Shield Adapter is designed to work with any shield that is compatible with the Arduino® Uno using...
₹2,499.00 *
NXT Sensor Adapter for NI myRIO The NXT Sensor Adapter for the NI myRIO is designed to bring the popular Lego ® Mindstorms ® NXT sensors to the myRIO ecosystem. The NXT Sensor Adaptor connects to one of the 34-pin MXP ports on your NI myRIO and breaks out the myRIO...
₹2,649.00 *
High Current Adapter for NI myRIO With the High Current Adapter, you can use your NI myRIO to interact with high current applications such as driving LED Strips, relays, and servos. (For motor applications, please see the myRIO Motor Adapter Board.) The High Current...
₹4,999.00 *
Motor Adapter for NI myRIO The Motor Adapter for NI myRIO allows you to easily connect and control either one stepper motor, two DC motors, or two servos independently through the MXP connector on your myRIO. It has been designed so that no additional circuitry is...
₹7,999.00 *
2-pin MTE Power Cable Features: Provide power to battery connection on a Digilent Board Provides access to any two signals that are tied to any 100mil spaced pins Cable length is 6.1 inches (15.5 cm)
₹339.00 *
Analog Discovery 2x15 Ribbon Cable This cable is a handy accompaniment to your Analog Discovery or Analog Discovery 2. This ribbon cable allows you to extend all 30 pins on the 2x15 pin male connector to a 2x15 pin female connector. The ribbon cable allows the pins of the...
₹1,089.00 *
Breadboard Wire Kit Have your circuits ever been so disastrously disorganized that everyone else is having a difficult time analyzing that tangle of wires you're calling a project? Well, with 140 wires of various lengths and colors at your disposal, any...
₹1,459.00 *
Coax Power Cable Features: 2.1mm female power connector for use with Digilent power supplies Useful for any Digilent product that can accept power from an outside source
₹229.00 *
HDMI Cable (Type A to Type D Micro) Features: 40" in length Type A to Type D Micro HDMI cable
₹1,489.00 *
Speaker Have you been searching for a speaker with a male auxiliary connector and cable that will allow you to blast all of the sounds that your heart desires? With a bandwidth frequency range of 880Hz to 10KHz, this speaker will work seamlessly...
₹1,489.00 *
Digital High Speed NI Multisim Wire Wrap or Analog Analog Speaker 4-pin MTE Cable OpenScope MZ Embedded Vision Breadboard Thermocouple Analog Hirose FX2 4-pin to Mini Grabber 9V PowerBRICK PowerBRICKS 30-pin Flywire 3.3V PowerBRICK Analog Digilent Analog Heatsink with BNC Adapter Ettus USRP N210 2x15 Flywires 2x6 Flywires DMM Probes DC Motor - 150 USB A to Mini-B Analog OpenScope MZ Digilent IR Proximity Analog Shield Adapter Breadboard Analog Analog Parts 30-Pin Flywire Motor Shield 2x6 Pin Header High Current Analog BNC to
Viewed