Top seller
No results were found for the filter!
Pmod CON4: RCA Audio Jacks The Pmod CON4 allows users to connect their system to two RCA audio jacks. GPIO signals can be transferred in either direction through the audio jacks with jumper blocks to adjust signal routing. Features: 2 RCA audio jacks Receive and...
₹559.00 *
Pmod AMP2: Audio Amplifier The Pmod AMP2 is a low power audio amplifier through the use of the Analog Devices SSM2377 . With digital gain options and a pop-and-click feature, users are able to drive a variety of monophonic outputs by providing a digital or analog...
₹1,049.00 *
Pmod PMON1: Power Monitor The Pmod PMON1 is a power monitoring system that uses the Analog Devices AD5112 and ADM119 . By using I 2 C, users can set a reference voltage on the AD5112 to indicate what qualifies as an overcurrent condition for the ADM119. Once an...
₹959.00 *
Pmod LS1: Infrared Light Detector The Digilent Pmod LS1 allows users to receive signals from multiple optical sensors, such as the popular combination of an IR LED with an IR sensor used in line-following robots. Features: Infrared light detector with on-board...
₹1,349.00 *
Pmod HYGRO: Digital Humidity and Temperature... The Pmod HYGRO is a relative humidity sensor with integrated temperature sensor for highly accurate measurements at low power. With the TI HDC1080 , you can determine the relative humidity of the environment with up to 14 bits of...
₹1,809.00 *
Pmod DPG1: Differential Pressure Gauge Sensor The Digilent Pmod DPG1 is a differential pressure gauge module. With NXP's MP3V5010DP piezoresistive transducer and Texas Instrument's ADCS7476 12-bit Analog-to-Digital Converter, you can detect when a change in pressure between the two...
₹2,959.00 *
Pmod RJ45: RJ45 connector (Pair) The Pmod RJ45 connector modules can offer an extended wired connection between two different systems. Shipped as a pair of male and female modules, users can connect the two together with an Ethernet cable to communicate via the Ethernet...
₹949.00 *
Pmod IOXP: I/O Expansion Module The Pmod IOXP is an I/O expansion module powered by the Analog Devices ADP5589. By communicating with the chip through I 2 C, users can take advantage of up to 19 additional I/O pins as well as a keypad matrix decoder. Features:...
₹2,129.00 *
Pmod CDC1: Capacitative Input Buttons The Pmod CDC1 is a capacitative sensor that uses the Analog Devices AD7156 . By communicating with the chip via I 2 C, users can set the Pmod for an adaptive capacitance threshold that changes with the environment or set static...
₹829.00 *
Pmod MTDS: Multi-Touch Display System The Digilent Pmod MTDS is a gorgeous 2.8" touchscreen display with a powerful on-board microcontroller that performs graphics processing tasks. The display is a capacitive touchscreen with QVGA resolution (320×240) and 2 finger...
₹6,999.00 *
Pmod Adapter for NI myRIO With the Pmod Adapter for myRIO, you can now connect your myRIO to the expansive selection of Pmods offered by Digilent. With this product, users can increase the functionality of their LabVIEW projects by easily accessing the SPI, I2C,...
₹2,469.00 *
Pmod SSR: Solid State Relay Electronic Switch The Pmod SSR is a solid state relay that features IXYS' CPC1908J. The Pmod SSR uses a switch controlled by a single GPIO pin and is rated to block up to 48 Volts and switch up to 6 Amps (rms) continuous current. Features: 0-48 V blocking...
₹3,129.00 *
Pmod HYGRO Cmod A7-15T Arty S7-25T Analog Pmod RS232 Pmod ISNS20 20A Nexys A7-50T Basys 3 Artix-7 Analog Nexys Video SMA to NI myRIO Nexys Video Pmod NAV 9-axis Interposer Arty A7-100T Project Starter Pmod ENC Rotary JTAG-HS3 Ettus USRP N210 Blank Canvas Ettus USRP HDMI Cable Type NI myRIO Genesys ZU-5EV Pmod OD1 Open Nexys 4 DDR Stepper Motor Eclypse Z7 Analog Cora Z7-10 Digital Pmod MicroSD Arty A7-35T NI Multisim Cmod A7-35T Analog Pmod HAT Pmod AMP2 Audio Analog Zybo Z7 Ettus USRP B210 Pmod NIC100 MCC 172 IEPE JTAG-SMT2-NC MCC 134
Viewed