• Polypropylene body / collets • Acetal check valve insert • Dual EPDM O-rings • 0-150 PSI pressure rating • 33° - 140°F ( 1° - 60°C) Temperature rating in Electronics in P&ID

• Splits water flow • Polypropylene construction • NSF Standard 58 Certified

The Atlas Scientific Flow Connector Board, does not come assembled; soldering is required . • Easily connects flow meter to EZO™ Universal Flow Meter Totalizer • Simple connection R - Vcc, W - Signal, B - Ground

• Exclusive ¼ turn lever with safety collar • Standard materials – PVC with EPDM seals • NSF Standard 58 Certified • 150 PSI @ 70°F (10 Bar @ 20°C)

• Replacement part for the Atlas Scientific 1/4" Flow Meter . • Insert the low flow adapter into the INPUT side of flow meter.

• White polypropylene construction • EPDM O-ring • FDA approved material • NSF Certified 51 & 62 • Suitable for water & food applications

• Self piercing • 1/4" Compression fitting • Works with copper and plastic pipe

• Max flow rate: Cv =.240 • Max pressure: 344.738 kPa (50 PSI) • Operating temperature: 1°C to 99°C • Weight: 6.9oz • Medical equipment safe • Laboratory equipment safe • Food Processing equipment safe • ISO 13485 • Coil and body can be...

• Polypropylene construction • Dual EPDM O-rings • NSF Standard 58 Certified

• Polypropylene construction • Dual EPDM O-rings • NSF Standard 58 Certified

Reads Total flow and flow rate Preprogrammed Works with all Atlas Scientific flow meters Programmable Can work with most off-the-shelf flow meters Visual display Real time turbine rotation Data protocol UART & I2C Default I2C address 104...

Flow rate 0.5ml to 105ml/mins Accuracy +/- 1% Modes of operation Continuous dispensing Volume dispensing Constant flow rate Dose over time mode Connector 5 lead data cable Calibration Single point Supplied tubing 15.24 cm Tubing size Any...