To provide access to the 4-20 mA current loop board signals on the Waspmote Plug & Sense! encapsulated line, a waterproof terminal block junction box is available as a probe, making the connections on industrial environments or outdoor...

The applications for this Plug & Sense! model are focused on adding wireless connectivity to 4-20 mA devices and connecting them to the Cloud. Sensors available: Terminal box probe DB9 probe Sensor Socket Sensor probes allowed for each...

The DB9 connector is commonly used in many applications with data transmission on industrial ambients. Libelium provides this probe with a standard DB9 female connector and a length of 1.5 meters.

This model is designed to monitor the main environment parameters easily. Only three sensor probes are allowed for this model. Sensors available: Temperature, Humidity and Pressure Luminosity (LDR) Luminosity (luxes accuracy) Sensor...

This is a resistive sensor whose conductivity varies depending on the intensity of light received on its photosensitive part. The measurable spectral range (400 nm – 700 nm) coincides with the human visible spectrum so it can be used to...

The main application for this Waspmote Plug & Sense! configuration is to measure radiation levels using a Geiger sensor. For this model, the Geiger tube is already included inside Waspmote, so the user does not have to connect any sensor...

The Smart Water model has been conceived to facilitate the remote monitoring of the most relevant parameters related to water quality. With this platform you can measure more than 14 parameters, including the most relevant for water...

The Smart Water model has been conceived to facilitate the remote monitoring of the most relevant parameters related to water quality. With this platform you can measure more than 5 parameters, including the most relevant for water...

The conductivity sensor is a two-pole cell whose resistance varies in function of the conductivity of the liquid it is immersed in. That conductivity will be proportional to the conductance of the sensor (the inverse of its resistance),...

The Smart Water model has been conceived to facilitate the remote monitoring of the most relevant parameters related to water quality. With this platform you can measure more than 5 parameters, including the most relevant for water...

Remember the Single Junction Reference Probe is mandatory for this sensor. Don't forget to purchase the Fluoride Calibration Kit for proper operation. For more information, read this article.

Remember the Single Junction Reference Probe is mandatory for this sensor. Don't forget to purchase the Fluoroborate Calibration Kit for proper operation. For more information, read this article .