The Basic USB to Serial Converter is a very useful tool that allows you to connect your Atlas Scientific circuits to your computer. • LED’s indicate RX and TX communication • Rapid calibration and debugging • 2 different output voltages...

A 1018 with an on-board powered 6-port full-speed (12Mbit/s) USB hub. Analog Inputs The analog inputs are used to measure continuous voltage outputs generated by various sensors such as temperature, humidity, position, or pressure....

Send and receive IR data with this Phidget. It can learn and reproduce signals from common devices like your TV remote. You can use the PhidgetIR to control devices with remote control input - such as your TV or Blu-ray player, from your...

BNC panel mount kit comes with : • 1x Rubber gasket (choice of color) • 1x BNC bulk head • 1x Hinged cover • 1x BNC cable (male to male) • 1x Template sticker • 2x Mounting screws • 2x Brass couplings BNC cable specs : • 15.8cm (6.25") •...

• BNC male to BNC female • 3 meters (10') • 430 Stainless Steel • Teflon™ • RG179 cable • 75 ohm impedance • Food safe • Max Temperature Rating: 200° C • Jacket diameter: 0.100 inch +/- 0.005 • Works with all Atlas Scientific probes

• BNC male to BNC female • 30 meters (100') • 430 Stainless Steel • Teflon™ • RG179 cable • 75 ohm impedance • Food safe • Max Temperature Rating: 200° C • Jacket diameter: 0.100 inch +/- 0.005 • Works with all Atlas Scientific probes

Read and write to RFID tags up to 6cm away. Supports EM4100 series, ISO11785 FDX-B and our own PhidgetTag protocols. The PhidgetRFID Read-Write reads RFID tags that are brought in close proximity to the reader and returns the tag...

A common output mode for industrial sensors is 4-20mA. This adapter lets you use 4-20mA sensors with an Analog Input or VINT Hub port. The 4-20mASensors can be connected to and powered by the provided terminals on the 4-20mA Adapter...

• No assembly required • Mounts in seconds • Holds four standard size probes • Holds four PT-1000 temperature probes, or four 1/4" tubes • Holds one 1/2" tube • Padded probe holders prevent breaking • Seriously, this product is really good

• No assembly required • Mounts in seconds • Holds three standard size probes • Holds two PT-1000 temperature probes, or two 1/4" tubes • Padded probe holders prevent breaking • Seriously, this product is really good

• Water proof / fully submersible • Provides years of protection • Hand moldable - stays flexible at extreme temperatures • Forms easily to odd shaped connectors • Non-conductive • Non-contaminating • 1.524m x 12.7mm (60" x 0.5") • A...

This board has 2 SPDT mechanical relays rated at 210W for DC or 1750VA for AC. The Dual Relay Board allows you to control larger loads and devices like AC or DC motors, electromagnets, solenoids, and incandescent light bulbs. Note: This...