This M3, pan-head screw is 12 mm long. It is made from steel, is zinc-plated, and comes in packs of 25. Dimensions Length: 14 mm General Specification Thread type: M3

These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just the right height for mounting expansion boards with standard-size female headers,...

This M2.5 hex nut is made from steel, is zinc-plated, and comes in packs of 25. General Specification Thread type:M2.5

This M2.5, pan-head screw is 6 mm long. It is made from steel, is zinc-plated, and comes in packs of 25. Dimension Length:6 mm General Specification Thread type:M2.5

The compact (0.5″ × 0.7″) D24V10F3 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 3.3 V while allowing for a maximum output current of 1 A . This regulator offers typical...

The compact (0.5″ × 0.7″) D24V10F5 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V while allowing for a maximum output current of 1 A . This regulator offers typical efficiencies...

The A-Star 32U4 Prime SV is a programmable board based on Atmel’s ATmega32U4 microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products,...

This is a bulk-packaged version of our A4988 Stepper Motor Driver Carrier that ships with male header pins installed . Please see that product’s page for more information about the driver. This version requires a minimum order quantity...

The LSM6DS33 combines a digital 3-axis accelerometer and 3-axis gyroscope into a single package. The sensor provides six independent acceleration and rotation rate readings whose sensitivities can be set in the ranges of ±2 g to ±16 g...

The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C,...

This tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to its leads. The shaftless design keeps this motor small: 8 mm in diameter and 3.4 mm in height. This...

This tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to its leads. The shaftless design keeps this motor small: 10 mm in diameter and 2.0 mm in height....