This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This...

This is the main base plate for the Romi chassis, including the battery cover, in black . It is included as part of the black Romi Chassis Kit. Note Without batteries

This item is a pair of motor-holding clips for the Romi chassis in black . These clips snap into the main Romi base plate, and then the motors snap into the clips. It is included as part of the black Romi Chassis Kit. Note Combined...

This item is a set of three plastic rollers, a 1″-diameter plastic ball, and a retaining clip that can be used on the front or back ball caster locations on the Romi chassis base plate. The ball is white, and all other parts are black ....

These white plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and...

This set of six battery contacts completes the six AA battery holder molded into the Romi chassis base plate. A set is included in each Romi Chassis Kit. Notes Combined weight of all six contact pieces.

This compact, inexpensive plastic gearmotor ( high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range....

This is the main base plate for the Romi chassis, including the battery cover, in white . It is included as part of the white Romi Chassis Kit. Notes: Without Batteries.

This product is a carrier board or breakout board for ON Semiconductor’s AMIS-30543 Micro-Stepping Motor Driver; we therefore recommend careful reading of the AMIS-30543 datasheet (495k pdf) before using this product. This stepper motor...

The qik 2s12v10 adds a comprehensive yet easy-to-use, high-power option to Pololu’s line of motor controllers. The compact board—it’s almost the same size as the dual VNH2SP30 carrier board by itself—allows any microcontroller or...

The Texas Instruments TPS2113A autoswitching power multiplexer allows you to switch seamlessly between two power sources of 2.8 V to 5.5 V while blocking reverse current into either source. The power multiplexer (or mux) has an...

The Fairchild FPF1320 dual-input single-output power switch is a unique IC that switches a load between two power sources. It behaves as a power multiplexer (or mux), using a digital select signal to determine which of the two 1.5 V to...