Digilent

Wire Wrap or Protoboard Expansion for NI myRIO

The MXP Wire Wrap provides a large 14x21 hole prototyping area on an expansion card compatible with the myRIO Expansion Port (MXP). The MXP Wirewrap functions as an I/O breakout, with bus traces for GND, 3.3V, and 5V on either side of...

₹1,149.00 *

MXP Extender Cable for myRIO

This cable is designed to extend reach of the myRIO expansion port (MXP). The MXP extender cable is perfectly suited for mounting expansion boards, such as the Pmod Adapter. Features: 34-pin male and female connectors 8" length (210±10mm)

₹569.00 *

myDigital Protoboard for NI myDAQ & myRIO

The Digilent myDigital accessory board for the NI myDAQ and NI myRIO is designed to provide students a cost-effective, portable, and engaging platform for teaching electronics. With a myDAQ / myRIO, NI Multisim, and a myDigital, you'll...

₹11,099.00 *

myProto Protoboard for NI myDAQ & myRIO

The Digilent myProto accessory board for the NI myDAQ and NI myRIO brings all your myDAQ/myRIO's signals to breadboard connections where they can be easily accessed using simple jumper wires, and even adds several useful I/O devices. The...

₹5,999.00 *

Shield Adapter (Uno R3) for NI myRIO

With the Shield Adapter for NI myRIO , you can now connect your myRIO to the expansive shield options offered by the Arduino ecosystem. The Shield Adapter is designed to work with any shield that is compatible with the Arduino® Uno using...

₹2,499.00 *

NXT Sensor Adapter for NI myRIO

The NXT Sensor Adapter for the NI myRIO is designed to bring the popular Lego ® Mindstorms ® NXT sensors to the myRIO ecosystem. The NXT Sensor Adaptor connects to one of the 34-pin MXP ports on your NI myRIO and breaks out the myRIO...

₹2,649.00 *

High Current Adapter for NI myRIO

With the High Current Adapter, you can use your NI myRIO to interact with high current applications such as driving LED Strips, relays, and servos. (For motor applications, please see the myRIO Motor Adapter Board.) The High Current...

₹4,999.00 *

Motor Adapter for NI myRIO

The Motor Adapter for NI myRIO allows you to easily connect and control either one stepper motor, two DC motors, or two servos independently through the MXP connector on your myRIO. It has been designed so that no additional circuitry is...

₹7,999.00 *

2-pin MTE Power Cable

Features: Provide power to battery connection on a Digilent Board Provides access to any two signals that are tied to any 100mil spaced pins Cable length is 6.1 inches (15.5 cm)

₹339.00 *

Analog Discovery 2x15 Ribbon Cable

This cable is a handy accompaniment to your Analog Discovery or Analog Discovery 2. This ribbon cable allows you to extend all 30 pins on the 2x15 pin male connector to a 2x15 pin female connector. The ribbon cable allows the pins of the...

₹1,089.00 *

Breadboard Wire Kit

Have your circuits ever been so disastrously disorganized that everyone else is having a difficult time analyzing that tangle of wires you're calling a project? Well, with 140 wires of various lengths and colors at your disposal, any...

₹1,459.00 *

Coax Power Cable

Features: 2.1mm female power connector for use with Digilent power supplies Useful for any Digilent product that can accept power from an outside source

₹229.00 *

Products from Digilent