Products from Digilent

The Digilent VRM (Voltage Regulator Module) is a battery-friendly, switching voltage regulator capable of providing 6A of current at 5V or 3.3V. The input voltage can be stepped down from sources as high as 15V. It is ideal for use in...

Features: Provides 0.23 second/60 degree rotation with 47 oz-in of Torque at 4.8V Provides 0.18 second/60 degree rotation with 56 oz-in of Torque at 6V Typical rotation range of 180° 3-pin Futaba style connector Includes a variety of...

The NI myRIO Starter Accessory Kit includes everything you need to get started connecting to and programming the I/O of NI myRIO. Kit Contents: Barrel connector with leads Assorted capacitors Diodes 7-segment display Mechanical rotary...

Features: Designed for continuous rotation Pulse width: 500-2500 µs Rotational range: 360° Motor type: brushed Gear type: plastic Rotation/support: dual bearings 3-pin Futaba style connector Dimensions: 1.61 in (40.8 mm) x 0.79 in (20.1...

Rugged metal motor mounts suitable for use with the Robotic Starter Kit (RSK), Base Plate Expansion or custom applications. Note: This kit does not include motors! Features: 5 3/8" wide for use with the Robotic Starter Kit (RSK or Base...

Provide your two-wheeled application with much needed stability and balance, without the need for additional coding. Two screw holes provide a secure way to mount the tail skid to a chassis. Now your robotic masterpiece can speed by...

Rugged metal angled expansion platform expansions for use with the Digilent Robotic Starter Kit (RSK). Useful for increasing the size of the RSK to add additional sensors, hardware or other custom requirements. Features: Extends the size...

Features: Perfect for mounting our GWS servos (or any standard r/c servos) to your project Made from heavy duty steel w/ powedercoat finish Comes with 2 servo brackets and 16 6-32 machine screws & nuts

The NI myRIO Embedded Kit contains common sensors, devices, and a display. Most of the products within the kit are also available for separate purchase. Kit contents: PmodBT2 (410-214): Bluetooth interface PmodCLS (410-092): LCD display,...

The NI myRIO Mechatronics Accessory Kit includes a variety of commonly used motors, sensors, and components. These products are also available for separate purchase. Kit contents: PmodACL (410-097): 3-axis accelerometer PmodALS...

Provide your robot with an additional platform level, or cover your board in protective acrylic. The long standoff kit allows you to attach acrylic or additional metal base plates to your design. Features: Kit includes four long...

Rugged metal bracket suitable for mounting IR proximity sensors on the base plate to create a line following robot. Mounting holes on 1/2" centers throughout the bracket allow for use in custom applications. Features: Angled bracket...