Products from MGSL

This a tiny little breadboard...half the size of a half-size breadboard! Measures 1.4" x 1.6" (3.5 cm x 4.5cm) Perfect for tiny projects and for sticking onto the top of Arduino protoshields!

This is a half size breadboard, good for small projects. It's 8.2 cm x 5.3 cm with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 3.5cm...

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard Brilliant White LED. The lens is 3mm in diameter. Features: 2.0-2.4 VDC forward drop Max...

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard green LED. The lens is 3mm in diameter, and is diffused. Features: 2.0-2.4 VDC forward...

Your first exposure to electrical engineering - the bread board. Who knew it would bring so much frustration? This is your standard solderless breadboard. It works with a wide variety of wire gauges (29-20 AWG). As is standard for most...

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard orange LED. The lens is 3mm in diameter, and is diffused. Features: 2.0-2.4 VDC forward...

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard red LED. The lens is 3mm in diameter, and is diffused. Features: 1.8-2.2VDC forward drop...

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard white LED. The lens is 3mm in diameter. Features: 2.0-2.4 VDC forward drop Max current:...

A very simple breadboard power supply board that takes power from a battery / dc supply and outputs both 5V and 3.3V regulated voltage. The .1" headers are mounted on the bottom of the PCB for simple insertion into a breadboard. A Simple...

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard yellow LED. The lens is 3mm in diameter, and is diffused. Features: 2.0-2.4 VDC forward...

Are you trying to make a quick dime from electronics? Why limit yourself to dimes? This coin acceptor will take up to six different kinds of coin! Whether you’re building your own arcade cabinet or just charging admission to your house,...

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a orange lens. It has a typical forward voltage of 2.0V and a rated forward...